You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
87 lines
1.7 KiB
87 lines
1.7 KiB
9 years ago
|
#pragma once
|
||
|
|
|
||
|
|
//
|
||
|
|
// Utilities for UART communication.
|
||
|
|
//
|
||
|
|
// First, init uart with usart_init().
|
||
|
|
// Then enable interrupts you want with usart_XXX_isr_enable().
|
||
|
|
//
|
||
|
|
|
||
|
|
#include <avr/io.h>
|
||
|
|
#include <avr/pgmspace.h>
|
||
|
|
#include <util/delay.h>
|
||
|
|
|
||
|
|
#include <stdbool.h>
|
||
|
|
#include <stdint.h>
|
||
|
|
|
||
|
|
#include "calc.h"
|
||
|
|
|
||
|
|
|
||
|
|
/* USART BAUD RATE REGISTER values at 16 MHz */
|
||
|
|
enum {
|
||
|
|
BAUD_9600 = 103,
|
||
|
|
BAUD_14400 = 68,
|
||
|
|
BAUD_19200 = 51,
|
||
|
|
BAUD_28800 = 34,
|
||
|
|
BAUD_38400 = 25,
|
||
|
|
BAUD_57600 = 16,
|
||
|
|
BAUD_76800 = 12,
|
||
|
|
BAUD_115200 = 8,
|
||
|
|
BAUD_250k = 3,
|
||
|
|
BAUD_500k = 1,
|
||
|
|
BAUD_1M = 0,
|
||
|
|
};
|
||
|
|
|
||
|
|
/** Init UART with a UBRR value - can use the BAUD_* constants for 16 MHz */
|
||
|
|
void usart_init(uint16_t ubrr);
|
||
|
|
|
||
|
|
|
||
|
|
/** Set Double Speed Asynchronous mode on or off */
|
||
|
|
void usart_set_2x(bool set);
|
||
|
|
|
||
|
|
|
||
|
|
/** Check if there's a byte in the RX register */
|
||
|
|
#define usart_rx_ready() bit_is_high(UCSR0A, RXC0)
|
||
|
|
|
||
|
|
|
||
|
|
/** Check if USART is ready to accept new byte to send */
|
||
|
|
#define usart_tx_ready() bit_is_high(UCSR0A, UDRE0)
|
||
|
|
|
||
|
|
|
||
|
|
// ---- Enable UART interrupts ------------
|
||
|
|
|
||
|
|
/** Enable or disable RX ISR */
|
||
|
|
#define usart_isr_rx_enable(yes) set_bit(UCSR0B, RXCIE0, (yes))
|
||
|
|
|
||
|
|
|
||
|
|
/** Enable or disable TX ISR (all data sent) */
|
||
|
|
#define usart_isr_tx_enable(yes) set_bit(UCSR0B, TXCIE0, (yes))
|
||
|
|
|
||
|
|
|
||
|
|
/** Enable or disable DRE ISR (data register empty) */
|
||
|
|
#define usart_isr_dre_enable(yes) set_bit(UCSR0B, UDRIE0, (yes))
|
||
|
|
|
||
|
|
|
||
|
|
// ---- Basic IO --------------------------
|
||
|
|
|
||
|
|
/** Send byte over USART */
|
||
|
|
void usart_tx(uint8_t data);
|
||
|
|
|
||
|
|
|
||
|
|
/** Receive one byte over USART */
|
||
|
|
uint8_t usart_rx(void);
|
||
|
|
|
||
|
|
|
||
|
|
/** Clear receive buffer */
|
||
|
|
void usart_flush_rx(void);
|
||
|
|
|
||
|
|
|
||
|
|
// ---- Strings ---------------------------
|
||
|
|
|
||
|
|
/** Send string over UART */
|
||
|
|
void usart_puts(const char* str);
|
||
|
|
|
||
|
|
|
||
|
|
/** Send progmem string `PSTR("foobar")` over UART */
|
||
|
|
void usart_puts_P(const char* str);
|