1-Wire tester, shows ROM code and temperature on an LCD screen
Je kunt niet meer dan 25 onderwerpen selecteren Onderwerpen moeten beginnen met een letter of nummer, kunnen streepjes bevatten ('-') en kunnen maximaal 35 tekens lang zijn.
 
 
 
 
1wire-tester/lcd.h

135 regels
3.2 KiB

#pragma once
// HD44780 LCD display driver - 4-bit mode
//
// LCD pins are configured using a file lcd_config.h, which you
// have to add next to your main.c file.
//
// Content can be something like this:
//
//
#include <stdint.h>
#include <stdbool.h>
#define LCD_RS D2
#define LCD_RW D3
#define LCD_E D4
#define LCD_D4 D5
#define LCD_D5 D6
#define LCD_D6 D7
#define LCD_D7 D8
// --- Commands ---
// Clear screen (reset)
#define LCD_CLEAR 0b00000001
// Move cursor to (0,0), unshift...
#define LCD_HOME 0b00000010
// Set mode: Increment + NoShift
#define LCD_MODE_INC 0b00000110
// Set mode: Increment + Shift
#define LCD_MODE_INC_SHIFT 0b00000111
// Set mode: Decrement + NoShift
#define LCD_MODE_DEC 0b00000100
// Set mode: Decrement + Shift
#define LCD_MODE_DEC_SHIFT 0b00000101
// Disable display (data remains untouched)
#define LCD_DISABLE 0b00001000
// Disable cursor
#define LCD_CURSOR_NONE 0b00001100
// Set cursor to still underscore
#define LCD_CURSOR_BAR 0b00001110
// Set cursor to blinking block
#define LCD_CURSOR_BLINK 0b00001101
// Set cursor to both of the above at once
#define LCD_CURSOR_BOTH (LCD_CURSOR_BAR | LCD_CURSOR_BLINK)
// Move cursor
#define LCD_MOVE_LEFT 0b00010000
#define LCD_MOVE_RIGHT 0b00010100
// Shift display
#define LCD_SHIFT_LEFT 0b00011000
#define LCD_SHIFT_RIGHT 0b00011100
// Set iface to 5x7 font, 1-line
#define LCD_IFACE_4BIT_1LINE 0b00100000
#define LCD_IFACE_8BIT_1LINE 0b00110000
// Set iface to 5x7 font, 2-line
#define LCD_IFACE_4BIT_2LINE 0b00101000
#define LCD_IFACE_8BIT_2LINE 0b00111000
extern const uint8_t LCD_ROW_ADDR[4];
/** Initialize the display */
void lcd_init();
/** Write an instruction byte */
void lcd_command(uint8_t bb);
/** Write a data byte */
void lcd_write(uint8_t bb);
/** Read BF & Address */
uint8_t lcd_read_bf_addr();
/** Read CGRAM or DDRAM */
uint8_t lcd_read();
/** Send a string to LCD */
void lcd_puts(char* str_p);
/** Send a string to LCD from program memory */
void lcd_puts_P(const char* str_p);
/** Sedn a char to LCD */
void lcd_putc(const char c);
/** Show string at X, Y */
#define lcd_puts_xy(x, y, str_p) do { lcd_xy((x), (y)); lcd_puts((str_p)); } while(0)
/** Show string at X, Y */
#define lcd_puts_xy_P(x, y, str_p) do { lcd_xy((x), (y)); lcd_puts_P((str_p)); } while(0)
/** Show char at X, Y */
#define lcd_putc_xy(x, y, c) do { lcd_xy((x), (y)); lcd_putc((c)); } while(0)
/** Set cursor position */
void lcd_xy(const uint8_t x, const uint8_t y);
/** Set LCD cursor. If not enabled, only remember it. */
#define CURSOR_NONE 0b00
#define CURSOR_BAR 0b10
#define CURSOR_BLINK 0b01
#define CURSOR_BOTH 0b11
void lcd_cursor(uint8_t type);
/** Display display (preserving cursor) */
void lcd_disable();
/** Enable display (restoring cursor) */
void lcd_enable();
/** Go home */
void lcd_home();
/** Clear the screen */
void lcd_clear();
/** Define a glyph - 8 bytes, right 5 bits are used */
void lcd_glyph(const uint8_t index, const uint8_t* array);
/** Define a glyph that's in PROGMEM */
void lcd_glyph_P(const uint8_t index, const uint8_t* array);
/** Set address in CGRAM */
void lcd_addr_cg(const uint8_t acg);
/** Set address in DDRAM */
void lcd_addr(const uint8_t add);