1-Wire tester, shows ROM code and temperature on an LCD screen
選択できるのは25トピックまでです。 トピックは、先頭が英数字で、英数字とダッシュ('-')を使用した35文字以内のものにしてください。
 
 
 
 
1wire-tester/lcd.c

354 行
5.5 KiB

#include <stdbool.h>
#include <stdint.h>
#include <avr/io.h>
#include <avr/pgmspace.h>
#include <util/delay.h>
#include "calc.h"
#include "iopins.h"
#include "nsdelay.h"
#include "lcd.h"
// Start address of rows
const uint8_t LCD_ROW_ADDR[] = {0x00, 0x40, 0x14, 0x54};
// Internal prototypes
void _lcd_mode_r();
void _lcd_mode_w();
void _lcd_clk();
void _lcd_wait_bf();
void _lcd_write_byte(uint8_t bb);
uint8_t _lcd_read_byte();
// Write utilities
#define _lcd_write_low(bb) _lcd_write_nibble((bb) & 0x0F)
#define _lcd_write_high(bb) _lcd_write_nibble(((bb) & 0xF0) >> 4)
#define _lcd_write_nibble(nib) do { \
pin_set(LCD_D7, get_bit((nib), 3)); \
pin_set(LCD_D6, get_bit((nib), 2)); \
pin_set(LCD_D5, get_bit((nib), 1)); \
pin_set(LCD_D4, get_bit((nib), 0)); \
} while(0)
// 0 W, 1 R
bool _lcd_mode;
struct
{
uint8_t x;
uint8_t y;
} _pos;
enum
{
TEXT = 0,
CG = 1
} _addrtype;
/** Initialize the display */
void lcd_init()
{
// configure pins as output
as_output(LCD_E);
as_output(LCD_RW);
as_output(LCD_RS);
_lcd_mode = 1; // force data pins to output
_lcd_mode_w();
// Magic sequence to invoke Cthulhu (or enter 4-bit mode)
_delay_ms(16);
_lcd_write_nibble(0b0011);
_lcd_clk();
_delay_ms(5);
_lcd_clk();
_delay_ms(5);
_lcd_clk();
_delay_ms(5);
_lcd_write_nibble(0b0010);
_lcd_clk();
_delay_us(100);
// Configure the display
lcd_command(LCD_IFACE_4BIT_2LINE);
lcd_command(LCD_DISABLE);
lcd_command(LCD_CLEAR);
lcd_command(LCD_MODE_INC);
// mark as enabled
lcd_enable();
_pos.x = 0;
_pos.y = 0;
_addrtype = TEXT;
}
/** Send a pulse on the ENABLE line */
void _lcd_clk()
{
pin_up(LCD_E);
delay_ns(450);
pin_down(LCD_E);
}
/** Enter READ mode */
void _lcd_mode_r()
{
if (_lcd_mode == 1) return; // already in R mode
pin_up(LCD_RW);
as_input_pu(LCD_D7);
as_input_pu(LCD_D6);
as_input_pu(LCD_D5);
as_input_pu(LCD_D4);
_lcd_mode = 1;
}
/** Enter WRITE mode */
void _lcd_mode_w()
{
if (_lcd_mode == 0) return; // already in W mode
pin_down(LCD_RW);
as_output(LCD_D7);
as_output(LCD_D6);
as_output(LCD_D5);
as_output(LCD_D4);
_lcd_mode = 0;
}
/** Read a byte */
uint8_t _lcd_read_byte()
{
_lcd_mode_r();
uint8_t res = 0;
_lcd_clk();
res = (pin_read(LCD_D7) << 7) | (pin_read(LCD_D6) << 6) | (pin_read(LCD_D5) << 5) | (pin_read(LCD_D4) << 4);
_lcd_clk();
res |= (pin_read(LCD_D7) << 3) | (pin_read(LCD_D6) << 2) | (pin_read(LCD_D5) << 1) | (pin_read(LCD_D4) << 0);
return res;
}
/** Write an instruction byte */
void lcd_command(uint8_t bb)
{
_lcd_wait_bf();
pin_down(LCD_RS); // select instruction register
_lcd_write_byte(bb); // send instruction byte
}
/** Write a data byte */
void lcd_write(uint8_t bb)
{
if (_addrtype == TEXT)
{
if (bb == '\r')
{
// CR
_pos.x = 0;
lcd_xy(_pos.x, _pos.y);
return;
}
if (bb == '\n')
{
// LF
_pos.y++;
lcd_xy(_pos.x, _pos.y);
return;
}
_pos.x++;
}
_lcd_wait_bf();
pin_up(LCD_RS); // select data register
_lcd_write_byte(bb); // send data byte
}
/** Read BF & Address */
uint8_t lcd_read_bf_addr()
{
pin_down(LCD_RS);
return _lcd_read_byte();
}
/** Read CGRAM or DDRAM */
uint8_t lcd_read()
{
if (_addrtype == TEXT) _pos.x++;
pin_up(LCD_RS);
return _lcd_read_byte();
}
/** Write a byte using the 4-bit interface */
void _lcd_write_byte(uint8_t bb)
{
_lcd_mode_w(); // enter W mode
_lcd_write_high(bb);
_lcd_clk();
_lcd_write_low(bb);
_lcd_clk();
}
/** Wait until the device is ready */
void _lcd_wait_bf()
{
uint8_t d = 0;
while (d++ < 120 && (lcd_read_bf_addr() & _BV(7)))
_delay_us(1);
}
/** Send a string to LCD */
void lcd_puts(char* str_p)
{
char c;
while ((c = *str_p++))
lcd_putc(c);
}
/** Print from progmem */
void lcd_puts_P(const char* str_p)
{
char c;
while ((c = pgm_read_byte(str_p++)))
lcd_putc(c);
}
/** Sedn a char to LCD */
void lcd_putc(const char c)
{
lcd_write(c);
}
/** Set cursor position */
void lcd_xy(const uint8_t x, const uint8_t y)
{
_pos.x = x;
_pos.y = y;
lcd_addr(LCD_ROW_ADDR[y] + (x));
}
uint8_t _lcd_old_cursor = CURSOR_NONE;
bool _lcd_enabled = false;
/** Set LCD cursor. If not enabled, only remember it. */
void lcd_cursor(uint8_t type)
{
_lcd_old_cursor = (type & CURSOR_BOTH);
if (_lcd_enabled) lcd_command(LCD_CURSOR_NONE | _lcd_old_cursor);
}
/** Display display (preserving cursor) */
void lcd_disable()
{
lcd_command(LCD_DISABLE);
_lcd_enabled = false;
}
/** Enable display (restoring cursor) */
void lcd_enable()
{
_lcd_enabled = true;
lcd_cursor(_lcd_old_cursor);
}
/** Go home */
void lcd_home()
{
lcd_command(LCD_HOME);
_pos.x = 0;
_pos.y = 0;
_addrtype = TEXT;
_delay_ms(1);
}
/** Clear the screen */
void lcd_clear()
{
lcd_command(LCD_CLEAR);
_pos.x = 0;
_pos.y = 0;
_addrtype = TEXT;
_delay_ms(1);
}
/** Define a glyph */
void lcd_glyph(const uint8_t index, const uint8_t* array)
{
lcd_addr_cg(index * 8);
for (uint8_t i = 0; i < 8; ++i)
{
lcd_write(array[i]);
}
// restore previous position
lcd_xy(_pos.x, _pos.y);
_addrtype = TEXT;
}
/** Define a glyph */
void lcd_glyph_P(const uint8_t index, const uint8_t* array)
{
lcd_addr_cg(index * 8);
for (uint8_t i = 0; i < 8; ++i)
{
lcd_write(pgm_read_byte(&array[i]));
}
// restore previous position
lcd_xy(_pos.x, _pos.y);
_addrtype = TEXT;
}
/** Set address in CGRAM */
void lcd_addr_cg(const uint8_t acg)
{
_addrtype = CG;
lcd_command(0b01000000 | ((acg) & 0b00111111));
}
/** Set address in DDRAM */
void lcd_addr(const uint8_t add)
{
_addrtype = TEXT;
lcd_command(0b10000000 | ((add) & 0b01111111));
}