/*
 * Copyright 2023 jacqueline <me@jacqueline.id.au>
 *
 * SPDX-License-Identifier: GPL-3.0-only
 */

#include "i2s_dac.hpp"

#include <stdint.h>
#include <sys/_stdint.h>

#include <cmath>
#include <cstdint>
#include <cstring>
#include <mutex>

#include "assert.h"
#include "driver/i2c.h"
#include "driver/i2s_common.h"
#include "driver/i2s_std.h"
#include "driver/i2s_types.h"
#include "esp_attr.h"
#include "esp_err.h"
#include "esp_log.h"
#include "freertos/portmacro.h"
#include "freertos/projdefs.h"
#include "freertos/ringbuf.h"
#include "hal/gpio_types.h"
#include "hal/i2c_types.h"

#include "gpios.hpp"
#include "hal/i2s_types.h"
#include "i2c.hpp"
#include "soc/clk_tree_defs.h"
#include "wm8523.hpp"

namespace drivers {

static const char* kTag = "i2s_dac";
static const i2s_port_t kI2SPort = I2S_NUM_0;

auto I2SDac::create(IGpios& expander) -> std::optional<I2SDac*> {
  i2s_chan_handle_t i2s_handle;
  i2s_chan_config_t channel_config =
      I2S_CHANNEL_DEFAULT_CONFIG(kI2SPort, I2S_ROLE_MASTER);

  ESP_ERROR_CHECK(i2s_new_channel(&channel_config, &i2s_handle, NULL));
  //
  // First, instantiate the instance so it can do all of its power on
  // configuration.
  std::unique_ptr<I2SDac> dac = std::make_unique<I2SDac>(expander, i2s_handle);

  // Whilst we wait for the initial boot, we can work on installing the I2S
  // driver.
  i2s_std_config_t i2s_config = {
      .clk_cfg = dac->clock_config_,
      .slot_cfg = dac->slot_config_,
      .gpio_cfg = {.mclk = GPIO_NUM_0,
                   .bclk = GPIO_NUM_26,
                   .ws = GPIO_NUM_27,
                   .dout = GPIO_NUM_5,
                   .din = I2S_GPIO_UNUSED,
                   .invert_flags =
                       {
                           .mclk_inv = false,
                           .bclk_inv = false,
                           .ws_inv = false,
                       }},
  };

  if (esp_err_t err =
          i2s_channel_init_std_mode(i2s_handle, &i2s_config) != ESP_OK) {
    ESP_LOGE(kTag, "failed to initialise i2s channel %x", err);
    return {};
  }

  return dac.release();
}

I2SDac::I2SDac(IGpios& gpio, i2s_chan_handle_t i2s_handle)
    : gpio_(gpio),
      i2s_handle_(i2s_handle),
      i2s_active_(false),
      clock_config_(I2S_STD_CLK_DEFAULT_CONFIG(48000)),
      slot_config_(I2S_STD_PHILIPS_SLOT_DEFAULT_CONFIG(I2S_DATA_BIT_WIDTH_16BIT,
                                                       I2S_SLOT_MODE_STEREO)) {
  clock_config_.clk_src = I2S_CLK_SRC_APLL;

  // Keep the 5V circuity off until it's needed.
  gpio_.WriteSync(IGpios::Pin::kAmplifierEnable, false);

  // Reset all registers back to their default values.
  wm8523::WriteRegister(wm8523::Register::kReset, 1);
  vTaskDelay(pdMS_TO_TICKS(10));
  wm8523::WriteRegister(wm8523::Register::kPsCtrl, 0b0);
}

I2SDac::~I2SDac() {
  Stop();
  i2s_del_channel(i2s_handle_);
}

auto I2SDac::Start() -> void {
  std::lock_guard<std::mutex> lock(configure_mutex_);

  gpio_.WriteSync(IGpios::Pin::kAmplifierUnmute, false);
  // Ramp up the amplifier power supply.
  gpio_.WriteSync(IGpios::Pin::kAmplifierEnable, true);

  // Wait for voltage to stabilise
  vTaskDelay(pdMS_TO_TICKS(5));

  // Ensure the DAC powers up to a muted state.
  wm8523::WriteRegister(wm8523::Register::kPsCtrl, 0b10);

  // Enable MCLK; this has the side effect of triggering the DAC's startup
  // sequence.
  i2s_channel_enable(i2s_handle_);
  i2s_active_ = true;

  // Wait for DAC output lines to stabilise
  vTaskDelay(pdMS_TO_TICKS(5));

  wm8523::WriteRegister(wm8523::Register::kPsCtrl, 0b11);

  vTaskDelay(pdMS_TO_TICKS(5));
  gpio_.WriteSync(IGpios::Pin::kAmplifierUnmute, true);
}

auto I2SDac::Stop() -> void {
  std::lock_guard<std::mutex> lock(configure_mutex_);

  // Mute the DAC.
  wm8523::WriteRegister(wm8523::Register::kPsCtrl, 0b10);
  vTaskDelay(pdMS_TO_TICKS(5));
  // Silence the output.
  gpio_.WriteSync(IGpios::Pin::kAmplifierUnmute, false);

  vTaskDelay(pdMS_TO_TICKS(5));

  // Turn everything off.
  wm8523::WriteRegister(wm8523::Register::kPsCtrl, 0b0);
  i2s_channel_disable(i2s_handle_);
  i2s_active_ = false;

  gpio_.WriteSync(IGpios::Pin::kAmplifierEnable, false);
}

auto I2SDac::Reconfigure(Channels ch, BitsPerSample bps, SampleRate rate)
    -> void {
  std::lock_guard<std::mutex> lock(configure_mutex_);

  if (i2s_active_) {
    // Ramp down into mute instead of just outright stopping to minimise any
    // clicks and pops.
    wm8523::WriteRegister(wm8523::Register::kPsCtrl, 0b10);
    vTaskDelay(pdMS_TO_TICKS(1));

    wm8523::WriteRegister(wm8523::Register::kPsCtrl, 0b01);
    i2s_channel_disable(i2s_handle_);
  }

  switch (ch) {
    case CHANNELS_MONO:
      slot_config_.slot_mode = I2S_SLOT_MODE_MONO;
      break;
    case CHANNELS_STEREO:
      slot_config_.slot_mode = I2S_SLOT_MODE_STEREO;
      break;
  }

  uint8_t word_length = 0;
  switch (bps) {
    case BPS_16:
      slot_config_.data_bit_width = I2S_DATA_BIT_WIDTH_16BIT;
      slot_config_.ws_width = 16;
      word_length = 0b00;
      break;
    case BPS_24:
      slot_config_.data_bit_width = I2S_DATA_BIT_WIDTH_24BIT;
      slot_config_.ws_width = 24;
      word_length = 0b10;
      break;
    case BPS_32:
      slot_config_.data_bit_width = I2S_DATA_BIT_WIDTH_32BIT;
      slot_config_.ws_width = 32;
      word_length = 0b11;
      break;
  }
  ESP_ERROR_CHECK(i2s_channel_reconfig_std_slot(i2s_handle_, &slot_config_));

  clock_config_.sample_rate_hz = rate;
  // If we have an MCLK/SCK, then it must be a multiple of both the sample rate
  // and the bit clock. At 24 BPS, we therefore have to change the MCLK multiple
  // to avoid issues at some sample rates. (e.g. 48KHz)
  clock_config_.mclk_multiple =
      bps == BPS_24 ? I2S_MCLK_MULTIPLE_384 : I2S_MCLK_MULTIPLE_256;
  ESP_ERROR_CHECK(i2s_channel_reconfig_std_clock(i2s_handle_, &clock_config_));

  // Set the correct word size, and set the input format to I2S-justified.
  wm8523::WriteRegister(wm8523::Register::kAifCtrl1, (word_length << 3) | 0b10);
  // Tell the DAC the clock ratio instead of waiting for it to auto detect.
  wm8523::WriteRegister(wm8523::Register::kAifCtrl2,
                        bps == BPS_24 ? 0b100 : 0b011);

  if (i2s_active_) {
    i2s_channel_enable(i2s_handle_);
    wm8523::WriteRegister(wm8523::Register::kPsCtrl, 0b11);
  }
}

auto I2SDac::WriteData(const cpp::span<const std::byte>& data) -> void {
  std::size_t bytes_written = 0;
  esp_err_t err = i2s_channel_write(i2s_handle_, data.data(), data.size_bytes(),
                                    &bytes_written, portMAX_DELAY);
  if (err != ESP_ERR_TIMEOUT) {
    ESP_ERROR_CHECK(err);
  }
}

extern "C" IRAM_ATTR auto callback(i2s_chan_handle_t handle,
                                   i2s_event_data_t* event,
                                   void* user_ctx) -> bool {
  if (event == nullptr || user_ctx == nullptr) {
    return false;
  }
  if (event->data == nullptr || event->size == 0) {
    return false;
  }
  uint8_t** buf = reinterpret_cast<uint8_t**>(event->data);
  auto src = reinterpret_cast<StreamBufferHandle_t>(user_ctx);

  BaseType_t ret = false;
  size_t bytes_written =
      xStreamBufferReceiveFromISR(src, *buf, event->size, &ret);

  // If we ran out of data, then make sure we clear out the DMA buffers rather
  // than continuing to repreat the last few samples.
  if (bytes_written < event->size) {
    std::memset((*buf) + bytes_written, 0, event->size - bytes_written);
  }

  return ret;
}

auto I2SDac::SetSource(StreamBufferHandle_t buffer) -> void {
  if (i2s_active_) {
    ESP_ERROR_CHECK(i2s_channel_disable(i2s_handle_));
  }
  i2s_event_callbacks_t callbacks{
      .on_recv = NULL,
      .on_recv_q_ovf = NULL,
      .on_sent = NULL,
      .on_send_q_ovf = NULL,
  };
  if (buffer != nullptr) {
    callbacks.on_sent = &callback;
  }
  i2s_channel_register_event_callback(i2s_handle_, &callbacks, buffer);
  if (i2s_active_) {
    ESP_ERROR_CHECK(i2s_channel_enable(i2s_handle_));
  }
}

}  // namespace drivers