You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
70 lines
2.7 KiB
70 lines
2.7 KiB
.TH "rtl_adsb" 1 "0.5.0" RTL-SDR "User Commands"
|
|
.SH NAME
|
|
rtl_adsb \- a simple ADS-B decoder
|
|
.SH DESCRIPTION
|
|
Uses a re-purposed DVB-T receiver as a software defined
|
|
radio to receive and decode ADS-B data. Written by Kyle Keen
|
|
and incorporated in the osmocom rtl-sdr project.
|
|
.LP
|
|
Automatic dependent surveillance-broadcast, ADS-B, consists
|
|
of position and other status data transmitted by aircraft
|
|
in support of air traffic control in order to improve safety
|
|
of flight.
|
|
.LP
|
|
Much software is available for the RTL2832. Most of the user-level
|
|
packages rely on the librtlsdr library which comes as part of the
|
|
rtl-sdr codebase. This codebase contains both the library itself and
|
|
also a number of command line tools such as rtl_test, rtl_sdr,
|
|
rtl_tcp, and rtl_fm. These command line tools use the library to test
|
|
for the existence of RTL2832 devices and to perform basic data
|
|
transfer functions to and from the device.
|
|
.LP
|
|
Because most of the RTL2832 devices are connected using USB, the
|
|
librtlsdr library depends on the libusb library to communicate with
|
|
the device.
|
|
.SH USAGE
|
|
With a suitable antenna for receiving the 1090 MHz signal attached
|
|
to the rtl-sdr supported device, this program will output the
|
|
data decoded from that signal.
|
|
.SH SYNOPSIS
|
|
.B rtl_adsb [-R] [-g gain] [-p ppm] [output file]
|
|
.SH OPTIONS
|
|
.IP "-d device_index (default: 0)"
|
|
.IP "-V verbove output (default: off)"
|
|
.IP "-S show short frames (default: off)"
|
|
.IP "-Q quality (0: no sanity checks, 0.5: half bit, 1: one bit (default), 2: two bits)"
|
|
.IP "-e allowed_errors (default: 5)"
|
|
.IP "-g tuner_gain (default: automatic)"
|
|
.IP "-p ppm_error (default: 0)"
|
|
.IP tfilename
|
|
(a '-' dumps samples to stdout)
|
|
(omitting the filename also uses stdout)
|
|
.SH EXAMPLES
|
|
.IP "Streaming with netcat:"
|
|
rtl_adsb | netcat -lp 8080
|
|
|
|
while true; do rtl_adsb | nc -lp 8080; done
|
|
.IP "Streaming with socat:"
|
|
rtl_adsb | socat -u - TCP4:sdrsharp.com:47806
|
|
.SH SEE ALSO
|
|
RTL-SDR wiki documentation:
|
|
.B http://sdr.osmocom.org/trac/wiki/rtl-sdr
|
|
.LP
|
|
Other rtl-sdr programs:
|
|
.sp
|
|
rtl_eeprom(1), rtl_fm(1), rtl_sdr(1), rtl_tcp(1), rtl_test(1)
|
|
.SH AUTHOR
|
|
This manual page was written by Maitland Bottoms
|
|
for the Debian project (but may be used by others).
|
|
.SH COPYRIGHT
|
|
Copyright (c) 2013 A. Maitland Bottoms <bottoms@debian.org>
|
|
.LP
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
.LP
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|