You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2.8 KiB
2.8 KiB
rtl-sdr
turns your Realtek RTL2832 based DVB dongle into a SDR receiver
======================================================================
For more information see:
https://osmocom.org/projects/rtl-sdr/wiki
**********************************************************************
*****************************
Modified RTL-SDR Blog Version
*****************************
1) VCO PLL current fix - Improves stability at frequencies above ~1.5 GHz https://www.rtl-sdr.com/beta-testing-a-modified-rtl-sdr-driver-for-l-band-heat-issues/
2) RTL_TCP ring buffer enhancement by Stephen Blinick https://www.rtl-sdr.com/significantly-improving-rtl_tcps-performance-with-ring-buffers/
3) Enabled direct sampling for rtl_tcp
4) rtl_biast program added, including the ability to turn on/off any GPIO
5) Hack to force the bias tee to always be on by setting the unused IR endpoint bit to 0 in the EEPROM. Example to force the BT to be always ON "rtl_eeprom -b y", to remove forced BT "rtl_eeprom -b n"
6) Hack to force direct sampling to be always on by setting the unused remote-enabled bit to 1 in the EEPROM. Example to force direct samping always "rtl_eeprom -q y". To remove forced direct sampling "rtl_eeprom -q n"
7) Repurposed "offset tuning" to toggle bias tee ON/OFF. We can now use the "offset tuning" button in SDR# and other programs to toggle the bias tee if there is no specific button in the GUI.
BIAS TEE NOTE: Always take care that you do not enable the bias tee when the device is connected to a short circuited antenna unless there is an inline LNA. However. if you did by accident, don't worry as the circuit is dually protected with a self-resetting thermal fuse and built in protection on the LDO. Just try not to short it out for days at a time, otherwise you could eventually degrade the thermal fuse.
********************
Installation (Linux):
********************
***NOTE***
If you previously installed librtlsdr-dev via the package manager you should remove this first BEFORE installing these drivers. To completely remove these drivers use the following commands
sudo apt purge librtlsdr*
sudo rm -rvf /usr/lib/librtlsdr* /usr/include/rtl-sdr* /usr/local/lib/librtlsdr* /usr/local/include/rtl-sdr*
sudo apt update
sudo apt install libusb-1.0-0-dev git cmake
git clone git clone git://github.com/rtlsdrblog/rtl-sdr-blog.git
cd rtl-sdr/
mkdir build
cd build
cmake ../ -DINSTALL_UDEV_RULES=ON
make
sudo make install
sudo cp ../rtl-sdr.rules /etc/udev/rules.d/
sudo ldconfig
echo 'blacklist dvb_usb_rtl28xxu' | sudo tee --append /etc/modprobe.d/blacklist-dvb_usb_rtl28xxu.conf
***********************
Installation (Windows):
***********************
Download the Release.zip file. Extract the librtlsdr.dll file to the SDR# folder, or whatever software is using it. Rename to rtlsdr.dll if necessary (e.g. SDR# looks for rtlsdr.dll instead of librtlsdr.dll)