/* (C) 2011-2012 by Harald Welte * * All Rights Reserved * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #include #include #include #include #include #include #include #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) /* If this is defined, the limits are somewhat relaxed compared to what the * vendor claims is possible */ #define OUT_OF_SPEC #define MHZ(x) ((x)*1000*1000) #define KHZ(x) ((x)*1000) uint32_t unsigned_delta(uint32_t a, uint32_t b) { if (a > b) return a - b; else return b - a; } /* look-up table bit-width -> mask */ static const uint8_t width2mask[] = { 0, 1, 3, 7, 0xf, 0x1f, 0x3f, 0x7f, 0xff }; /*********************************************************************** * Register Access */ #if 0 /*! \brief Write a register of the tuner chip * \param[in] e4k reference to the tuner * \param[in] reg number of the register * \param[in] val value to be written * \returns 0 on success, negative in case of error */ int e4k_reg_write(struct e4k_state *e4k, uint8_t reg, uint8_t val) { /* FIXME */ return 0; } /*! \brief Read a register of the tuner chip * \param[in] e4k reference to the tuner * \param[in] reg number of the register * \returns positive 8bit register contents on success, negative in case of error */ int e4k_reg_read(struct e4k_state *e4k, uint8_t reg) { /* FIXME */ return 0; } #endif /*! \brief Set or clear some (masked) bits inside a register * \param[in] e4k reference to the tuner * \param[in] reg number of the register * \param[in] mask bit-mask of the value * \param[in] val data value to be written to register * \returns 0 on success, negative in case of error */ static int e4k_reg_set_mask(struct e4k_state *e4k, uint8_t reg, uint8_t mask, uint8_t val) { uint8_t tmp = e4k_reg_read(e4k, reg); if ((tmp & mask) == val) return 0; return e4k_reg_write(e4k, reg, (tmp & ~mask) | (val & mask)); } /*! \brief Write a given field inside a register * \param[in] e4k reference to the tuner * \param[in] field structure describing the field * \param[in] val value to be written * \returns 0 on success, negative in case of error */ static int e4k_field_write(struct e4k_state *e4k, const struct reg_field *field, uint8_t val) { int rc; uint8_t mask; rc = e4k_reg_read(e4k, field->reg); if (rc < 0) return rc; mask = width2mask[field->width] << field->shift; return e4k_reg_set_mask(e4k, field->reg, mask, val << field->shift); } /*! \brief Read a given field inside a register * \param[in] e4k reference to the tuner * \param[in] field structure describing the field * \returns positive value of the field, negative in case of error */ static int e4k_field_read(struct e4k_state *e4k, const struct reg_field *field) { int rc; rc = e4k_reg_read(e4k, field->reg); if (rc < 0) return rc; rc = (rc >> field->shift) & width2mask[field->width]; return rc; } /*********************************************************************** * Filter Control */ static const uint32_t rf_filt_center_uhf[] = { MHZ(360), MHZ(380), MHZ(405), MHZ(425), MHZ(450), MHZ(475), MHZ(505), MHZ(540), MHZ(575), MHZ(615), MHZ(670), MHZ(720), MHZ(760), MHZ(840), MHZ(890), MHZ(970) }; static const uint32_t rf_filt_center_l[] = { MHZ(1300), MHZ(1320), MHZ(1360), MHZ(1410), MHZ(1445), MHZ(1460), MHZ(1490), MHZ(1530), MHZ(1560), MHZ(1590), MHZ(1640), MHZ(1660), MHZ(1680), MHZ(1700), MHZ(1720), MHZ(1750) }; static int closest_arr_idx(const uint32_t *arr, unsigned int arr_size, uint32_t freq) { unsigned int i, bi = 0; uint32_t best_delta = 0xffffffff; /* iterate over the array containing a list of the center * frequencies, selecting the closest one */ for (i = 0; i < arr_size; i++) { uint32_t delta = unsigned_delta(freq, arr[i]); if (delta < best_delta) { best_delta = delta; bi = i; } } return bi; } /* return 4-bit index as to which RF filter to select */ static int choose_rf_filter(uint32_t freq) { int rc; if (freq < MHZ(350)) rc = 0; else if (freq < MHZ(1000)) rc = closest_arr_idx(rf_filt_center_uhf, ARRAY_SIZE(rf_filt_center_uhf), freq); else rc = closest_arr_idx(rf_filt_center_l, ARRAY_SIZE(rf_filt_center_l), freq); return rc; } /* \brief Automatically select apropriate RF filter based on e4k state */ int e4k_rf_filter_set(struct e4k_state *e4k) { int rc; rc = choose_rf_filter(e4k->vco.flo); if (rc < 0) return rc; return e4k_reg_set_mask(e4k, E4K_REG_FILT1, 0xF, rc); } /* Mixer Filter */ static const uint32_t mix_filter_bw[] = { KHZ(27000), KHZ(27000), KHZ(27000), KHZ(27000), KHZ(27000), KHZ(27000), KHZ(27000), KHZ(27000), KHZ(4600), KHZ(4200), KHZ(3800), KHZ(3400), KHZ(3300), KHZ(2700), KHZ(2300), KHZ(1900) }; /* IF RC Filter */ static const uint32_t ifrc_filter_bw[] = { KHZ(21400), KHZ(21000), KHZ(17600), KHZ(14700), KHZ(12400), KHZ(10600), KHZ(9000), KHZ(7700), KHZ(6400), KHZ(5300), KHZ(4400), KHZ(3400), KHZ(2600), KHZ(1800), KHZ(1200), KHZ(1000) }; /* IF Channel Filter */ static const uint32_t ifch_filter_bw[] = { KHZ(5500), KHZ(5300), KHZ(5000), KHZ(4800), KHZ(4600), KHZ(4400), KHZ(4300), KHZ(4100), KHZ(3900), KHZ(3800), KHZ(3700), KHZ(3600), KHZ(3400), KHZ(3300), KHZ(3200), KHZ(3100), KHZ(3000), KHZ(2950), KHZ(2900), KHZ(2800), KHZ(2750), KHZ(2700), KHZ(2600), KHZ(2550), KHZ(2500), KHZ(2450), KHZ(2400), KHZ(2300), KHZ(2280), KHZ(2240), KHZ(2200), KHZ(2150) }; static const uint32_t *if_filter_bw[] = { mix_filter_bw, ifch_filter_bw, ifrc_filter_bw, }; static const uint32_t if_filter_bw_len[] = { ARRAY_SIZE(mix_filter_bw), ARRAY_SIZE(ifch_filter_bw), ARRAY_SIZE(ifrc_filter_bw), }; static const struct reg_field if_filter_fields[] = { { E4K_REG_FILT2, 4, 4, }, { E4K_REG_FILT3, 0, 5, }, { E4K_REG_FILT2, 0, 4, } }; static int find_if_bw(enum e4k_if_filter filter, uint32_t bw) { if (filter >= ARRAY_SIZE(if_filter_bw)) return -EINVAL; return closest_arr_idx(if_filter_bw[filter], if_filter_bw_len[filter], bw); } /*! \brief Set the filter band-width of any of the IF filters * \param[in] e4k reference to the tuner chip * \param[in] filter filter to be configured * \param[in] bandwidth bandwidth to be configured * \returns positive actual filter band-width, negative in case of error */ int e4k_if_filter_bw_set(struct e4k_state *e4k, enum e4k_if_filter filter, uint32_t bandwidth) { int bw_idx; const struct reg_field *field; if (filter >= ARRAY_SIZE(if_filter_bw)) return -EINVAL; bw_idx = find_if_bw(filter, bandwidth); field = &if_filter_fields[filter]; return e4k_field_write(e4k, field, bw_idx); } /*! \brief Enables / Disables the channel filter * \param[in] e4k reference to the tuner chip * \param[in] on 1=filter enabled, 0=filter disabled * \returns 0 success, negative errors */ int e4k_if_filter_chan_enable(struct e4k_state *e4k, int on) { return e4k_reg_set_mask(e4k, E4K_REG_FILT3, E4K_FILT3_DISABLE, on ? 0 : E4K_FILT3_DISABLE); } int e4k_if_filter_bw_get(struct e4k_state *e4k, enum e4k_if_filter filter) { const uint32_t *arr; int rc; const struct reg_field *field; if (filter >= ARRAY_SIZE(if_filter_bw)) return -EINVAL; field = &if_filter_fields[filter]; rc = e4k_field_read(e4k, field); if (rc < 0) return rc; arr = if_filter_bw[filter]; return arr[rc]; } /*********************************************************************** * Frequency Control */ #define E4K_FVCO_MIN_KHZ 2600000 /* 2.6 GHz */ #define E4K_FVCO_MAX_KHZ 3900000 /* 3.9 GHz */ #define E4K_PLL_Y 65536 #ifdef OUT_OF_SPEC #define E4K_FLO_MIN_MHZ 50 #define E4K_FLO_MAX_MHZ 2200UL #else #define E4K_FLO_MIN_MHZ 64 #define E4K_FLO_MAX_MHZ 1700 #endif struct pll_settings { uint32_t freq; uint8_t reg_synth7; uint8_t mult; }; static const struct pll_settings pll_vars[] = { {KHZ(72400), (1 << 3) | 7, 48}, {KHZ(81200), (1 << 3) | 6, 40}, {KHZ(108300), (1 << 3) | 5, 32}, {KHZ(162500), (1 << 3) | 4, 24}, {KHZ(216600), (1 << 3) | 3, 16}, {KHZ(325000), (1 << 3) | 2, 12}, {KHZ(350000), (1 << 3) | 1, 8}, {KHZ(432000), (0 << 3) | 3, 8}, {KHZ(667000), (0 << 3) | 2, 6}, {KHZ(1200000), (0 << 3) | 1, 4} }; static int is_fvco_valid(uint32_t fvco_z) { /* check if the resulting fosc is valid */ if (fvco_z/1000 < E4K_FVCO_MIN_KHZ || fvco_z/1000 > E4K_FVCO_MAX_KHZ) { fprintf(stderr, "Fvco %u invalid\n", fvco_z); return 0; } return 1; } static int is_fosc_valid(uint32_t fosc) { if (fosc < MHZ(16) || fosc > MHZ(30)) { fprintf(stderr, "Fosc %u invalid\n", fosc); return 0; } return 1; } static int is_z_valid(uint32_t z) { if (z > 255) { fprintf(stderr, "Z %u invalid\n", z); return 0; } return 1; } /*! \brief Determine if 3-phase mixing shall be used or not */ static int use_3ph_mixing(uint32_t flo) { /* this is a magic number somewhre between VHF and UHF */ if (flo < MHZ(350)) return 1; return 0; } /* \brief compute Fvco based on Fosc, Z and X * \returns positive value (Fvco in Hz), 0 in case of error */ static uint64_t compute_fvco(uint32_t f_osc, uint8_t z, uint16_t x) { uint64_t fvco_z, fvco_x, fvco; /* We use the following transformation in order to * handle the fractional part with integer arithmetic: * Fvco = Fosc * (Z + X/Y) <=> Fvco = Fosc * Z + (Fosc * X)/Y * This avoids X/Y = 0. However, then we would overflow a 32bit * integer, as we cannot hold e.g. 26 MHz * 65536 either. */ fvco_z = (uint64_t)f_osc * z; #if 0 if (!is_fvco_valid(fvco_z)) return 0; #endif fvco_x = ((uint64_t)f_osc * x) / E4K_PLL_Y; fvco = fvco_z + fvco_x; return fvco; } static int compute_flo(uint32_t f_osc, uint8_t z, uint16_t x, uint8_t r) { uint64_t fvco = compute_fvco(f_osc, z, x); if (fvco == 0) return -EINVAL; return fvco / r; } static int e4k_band_set(struct e4k_state *e4k, enum e4k_band band) { int rc; switch (band) { case E4K_BAND_VHF2: case E4K_BAND_VHF3: case E4K_BAND_UHF: e4k_reg_write(e4k, E4K_REG_BIAS, 3); break; case E4K_BAND_L: e4k_reg_write(e4k, E4K_REG_BIAS, 0); break; } rc = e4k_reg_set_mask(e4k, E4K_REG_SYNTH1, 0x06, band << 1); if (rc >= 0) e4k->band = band; return rc; } /*! \brief Compute PLL parameters for givent target frequency * \param[out] oscp Oscillator parameters, if computation successful * \param[in] fosc Clock input frequency applied to the chip (Hz) * \param[in] intended_flo target tuning frequency (Hz) * \returns actual PLL frequency, as close as possible to intended_flo, * negative in case of error */ int e4k_compute_pll_params(struct e4k_pll_params *oscp, uint32_t fosc, uint32_t intended_flo) { uint32_t i; uint8_t r = 2; uint64_t intended_fvco, remainder; uint64_t z = 0; uint32_t x; int flo; int three_phase_mixing = 0; oscp->r_idx = 0; if (!is_fosc_valid(fosc)) return -EINVAL; for(i = 0; i < ARRAY_SIZE(pll_vars); ++i) { if(intended_flo < pll_vars[i].freq) { three_phase_mixing = (pll_vars[i].reg_synth7 & 0x08) ? 1 : 0; oscp->r_idx = pll_vars[i].reg_synth7; r = pll_vars[i].mult; break; } } //fprintf(stderr, "Fint=%u, R=%u\n", intended_flo, r); /* flo(max) = 1700MHz, R(max) = 48, we need 64bit! */ intended_fvco = (uint64_t)intended_flo * r; /* compute integral component of multiplier */ z = intended_fvco / fosc; /* compute fractional part. this will not overflow, * as fosc(max) = 30MHz and z(max) = 255 */ remainder = intended_fvco - (fosc * z); /* remainder(max) = 30MHz, E4K_PLL_Y = 65536 -> 64bit! */ x = (remainder * E4K_PLL_Y) / fosc; /* x(max) as result of this computation is 65536 */ flo = compute_flo(fosc, z, x, r); oscp->fosc = fosc; oscp->flo = flo; oscp->intended_flo = intended_flo; oscp->r = r; // oscp->r_idx = pll_vars[i].reg_synth7 & 0x0; oscp->threephase = three_phase_mixing; oscp->x = x; oscp->z = z; return flo; } int e4k_tune_params(struct e4k_state *e4k, struct e4k_pll_params *p) { uint8_t val; /* program R + 3phase/2phase */ e4k_reg_write(e4k, E4K_REG_SYNTH7, p->r_idx); /* program Z */ e4k_reg_write(e4k, E4K_REG_SYNTH3, p->z); /* program X */ e4k_reg_write(e4k, E4K_REG_SYNTH4, p->x & 0xff); e4k_reg_write(e4k, E4K_REG_SYNTH5, p->x >> 8); /* we're in auto calibration mode, so there's no need to trigger it */ memcpy(&e4k->vco, p, sizeof(e4k->vco)); /* set the band */ if (e4k->vco.flo < MHZ(140)) e4k_band_set(e4k, E4K_BAND_VHF2); else if (e4k->vco.flo < MHZ(350)) e4k_band_set(e4k, E4K_BAND_VHF3); else if (e4k->vco.flo < MHZ(1000)) e4k_band_set(e4k, E4K_BAND_UHF); else e4k_band_set(e4k, E4K_BAND_L); /* select and set proper RF filter */ e4k_rf_filter_set(e4k); return e4k->vco.flo; } /*! \brief High-level tuning API, just specify frquency * * This function will compute matching PLL parameters, program them into the * hardware and set the band as well as RF filter. * * \param[in] e4k reference to tuner * \param[in] freq frequency in Hz * \returns actual tuned frequency, negative in case of error */ int e4k_tune_freq(struct e4k_state *e4k, uint32_t freq) { int rc, i; struct e4k_pll_params p; /* determine PLL parameters */ rc = e4k_compute_pll_params(&p, e4k->vco.fosc, freq); if (rc < 0) return rc; /* actually tune to those parameters */ rc = e4k_tune_params(e4k, &p); /* check PLL lock */ rc = e4k_reg_read(e4k, E4K_REG_SYNTH1); if (!(rc & 0x01)) { printf("[E4K] PLL not locked!\n"); return -1; } return 0; } /*********************************************************************** * Gain Control */ static const int8_t if_stage1_gain[] = { -3, 6 }; static const int8_t if_stage23_gain[] = { 0, 3, 6, 9 }; static const int8_t if_stage4_gain[] = { 0, 1, 2, 2 }; static const int8_t if_stage56_gain[] = { 3, 6, 9, 12, 15, 15, 15, 15 }; static const int8_t *if_stage_gain[] = { 0, if_stage1_gain, if_stage23_gain, if_stage23_gain, if_stage4_gain, if_stage56_gain, if_stage56_gain }; static const uint8_t if_stage_gain_len[] = { 0, ARRAY_SIZE(if_stage1_gain), ARRAY_SIZE(if_stage23_gain), ARRAY_SIZE(if_stage23_gain), ARRAY_SIZE(if_stage4_gain), ARRAY_SIZE(if_stage56_gain), ARRAY_SIZE(if_stage56_gain) }; static const struct reg_field if_stage_gain_regs[] = { { E4K_REG_GAIN3, 0, 1 }, { E4K_REG_GAIN3, 1, 2 }, { E4K_REG_GAIN3, 3, 2 }, { E4K_REG_GAIN3, 5, 2 }, { E4K_REG_GAIN4, 0, 3 }, { E4K_REG_GAIN4, 3, 3 } }; static const int32_t lnagain[] = { -50, 0, -25, 1, 0, 4, 25, 5, 50, 6, 75, 7, 100, 8, 125, 9, 150, 10, 175, 11, 200, 12, 250, 13, 300, 14, }; static const int32_t enhgain[] = { 10, 30, 50, 70 }; int e4k_set_lna_gain(struct e4k_state *e4k, int32_t gain) { uint32_t i; for(i = 0; i < ARRAY_SIZE(lnagain)/2; ++i) { if(lnagain[i*2] == gain) { e4k_reg_set_mask(e4k, E4K_REG_GAIN1, 0xf, lnagain[i*2+1]); return gain; } } return -EINVAL; } int e4k_set_enh_gain(struct e4k_state *e4k, int32_t gain) { uint32_t i; for(i = 0; i < ARRAY_SIZE(enhgain); ++i) { if(enhgain[i] == gain) { e4k_reg_set_mask(e4k, E4K_REG_AGC11, 0x7, E4K_AGC11_LNA_GAIN_ENH | (i << 1)); return gain; } } e4k_reg_set_mask(e4k, E4K_REG_AGC11, 0x7, 0); return 0; } int e4k_enable_manual_gain(struct e4k_state *e4k, uint8_t manual) { if (manual) { /* Set LNA mode to manual */ e4k_reg_set_mask(e4k, E4K_REG_AGC1, E4K_AGC1_MOD_MASK, E4K_AGC_MOD_SERIAL); /* Set Mixer Gain Control to manual */ e4k_reg_set_mask(e4k, E4K_REG_AGC7, E4K_AGC7_MIX_GAIN_AUTO, 0); } else { /* Set LNA mode to auto */ e4k_reg_set_mask(e4k, E4K_REG_AGC1, E4K_AGC1_MOD_MASK, E4K_AGC_MOD_IF_SERIAL_LNA_AUTON); /* Set Mixer Gain Control to auto */ e4k_reg_set_mask(e4k, E4K_REG_AGC7, E4K_AGC7_MIX_GAIN_AUTO, 1); e4k_reg_set_mask(e4k, E4K_REG_AGC11, 0x7, 0); } return 0; } static int find_stage_gain(uint8_t stage, int8_t val) { const int8_t *arr; int i; if (stage >= ARRAY_SIZE(if_stage_gain)) return -EINVAL; arr = if_stage_gain[stage]; for (i = 0; i < if_stage_gain_len[stage]; i++) { if (arr[i] == val) return i; } return -EINVAL; } /*! \brief Set the gain of one of the IF gain stages * \param[e4k] handle to the tuner chip * \param [stage] numbere of the stage (1..6) * \param [value] gain value in dBm * \returns 0 on success, negative in case of error */ int e4k_if_gain_set(struct e4k_state *e4k, uint8_t stage, int8_t value) { int rc; uint8_t mask; const struct reg_field *field; rc = find_stage_gain(stage, value); if (rc < 0) return rc; /* compute the bit-mask for the given gain field */ field = &if_stage_gain_regs[stage]; mask = width2mask[field->width] << field->shift; return e4k_reg_set_mask(e4k, field->reg, mask, rc << field->shift); } int e4k_mixer_gain_set(struct e4k_state *e4k, int8_t value) { uint8_t bit; switch (value) { case 4: bit = 0; break; case 12: bit = 1; break; default: return -EINVAL; } return e4k_reg_set_mask(e4k, E4K_REG_GAIN2, 1, bit); } int e4k_commonmode_set(struct e4k_state *e4k, int8_t value) { if(value < 0) return -EINVAL; else if(value > 7) return -EINVAL; return e4k_reg_set_mask(e4k, E4K_REG_DC7, 7, value); } /*********************************************************************** * DC Offset */ int e4k_manual_dc_offset(struct e4k_state *e4k, int8_t iofs, int8_t irange, int8_t qofs, int8_t qrange) { int res; if((iofs < 0x00) || (iofs > 0x3f)) return -EINVAL; if((irange < 0x00) || (irange > 0x03)) return -EINVAL; if((qofs < 0x00) || (qofs > 0x3f)) return -EINVAL; if((qrange < 0x00) || (qrange > 0x03)) return -EINVAL; res = e4k_reg_set_mask(e4k, E4K_REG_DC2, 0x3f, iofs); if(res < 0) return res; res = e4k_reg_set_mask(e4k, E4K_REG_DC3, 0x3f, qofs); if(res < 0) return res; res = e4k_reg_set_mask(e4k, E4K_REG_DC4, 0x33, (qrange << 4) | irange); return res; } /*! \brief Perform a DC offset calibration right now * \param[e4k] handle to the tuner chip */ int e4k_dc_offset_calibrate(struct e4k_state *e4k) { /* make sure the DC range detector is enabled */ e4k_reg_set_mask(e4k, E4K_REG_DC5, E4K_DC5_RANGE_DET_EN, E4K_DC5_RANGE_DET_EN); return e4k_reg_write(e4k, E4K_REG_DC1, 0x01); } static const int8_t if_gains_max[] = { 0, 6, 9, 9, 2, 15, 15 }; struct gain_comb { int8_t mixer_gain; int8_t if1_gain; uint8_t reg; }; static const struct gain_comb dc_gain_comb[] = { { 4, -3, 0x50 }, { 4, 6, 0x51 }, { 12, -3, 0x52 }, { 12, 6, 0x53 }, }; #define TO_LUT(offset, range) (offset | (range << 6)) int e4k_dc_offset_gen_table(struct e4k_state *e4k) { uint32_t i; /* FIXME: read ont current gain values and write them back * before returning to the caller */ /* disable auto mixer gain */ e4k_reg_set_mask(e4k, E4K_REG_AGC7, E4K_AGC7_MIX_GAIN_AUTO, 0); /* set LNA/IF gain to full manual */ e4k_reg_set_mask(e4k, E4K_REG_AGC1, E4K_AGC1_MOD_MASK, E4K_AGC_MOD_SERIAL); /* set all 'other' gains to maximum */ for (i = 2; i <= 6; i++) e4k_if_gain_set(e4k, i, if_gains_max[i]); /* iterate over all mixer + if_stage_1 gain combinations */ for (i = 0; i < ARRAY_SIZE(dc_gain_comb); i++) { uint8_t offs_i, offs_q, range, range_i, range_q; /* set the combination of mixer / if1 gain */ e4k_mixer_gain_set(e4k, dc_gain_comb[i].mixer_gain); e4k_if_gain_set(e4k, 1, dc_gain_comb[i].if1_gain); /* perform actual calibration */ e4k_dc_offset_calibrate(e4k); /* extract I/Q offset and range values */ offs_i = e4k_reg_read(e4k, E4K_REG_DC2) & 0x3f; offs_q = e4k_reg_read(e4k, E4K_REG_DC3) & 0x3f; range = e4k_reg_read(e4k, E4K_REG_DC4); range_i = range & 0x3; range_q = (range >> 4) & 0x3; printf("Table %u I=%u/%u, Q=%u/%u\n", i, range_i, offs_i, range_q, offs_q); /* write into the table */ e4k_reg_write(e4k, dc_gain_comb[i].reg, TO_LUT(offs_q, range_q)); e4k_reg_write(e4k, dc_gain_comb[i].reg + 0x10, TO_LUT(offs_i, range_i)); } return 0; } /*********************************************************************** * Initialization */ static int magic_init(struct e4k_state *e4k) { e4k_reg_write(e4k, 0x7e, 0x01); e4k_reg_write(e4k, 0x7f, 0xfe); e4k_reg_write(e4k, 0x82, 0x00); e4k_reg_write(e4k, 0x86, 0x50); /* polarity A */ e4k_reg_write(e4k, 0x87, 0x20); e4k_reg_write(e4k, 0x88, 0x01); e4k_reg_write(e4k, 0x9f, 0x7f); e4k_reg_write(e4k, 0xa0, 0x07); return 0; } /*! \brief Initialize the E4K tuner */ int e4k_init(struct e4k_state *e4k) { /* make a dummy i2c read or write command, will not be ACKed! */ e4k_reg_read(e4k, 0); /* Make sure we reset everything and clear POR indicator */ e4k_reg_write(e4k, E4K_REG_MASTER1, E4K_MASTER1_RESET | E4K_MASTER1_NORM_STBY | E4K_MASTER1_POR_DET ); /* Configure clock input */ e4k_reg_write(e4k, E4K_REG_CLK_INP, 0x00); /* Disable clock output */ e4k_reg_write(e4k, E4K_REG_REF_CLK, 0x00); e4k_reg_write(e4k, E4K_REG_CLKOUT_PWDN, 0x96); /* Write some magic values into registers */ magic_init(e4k); #if 0 /* Set common mode voltage a bit higher for more margin 850 mv */ e4k_commonmode_set(e4k, 4); /* Initialize DC offset lookup tables */ e4k_dc_offset_gen_table(e4k); /* Enable time variant DC correction */ e4k_reg_write(e4k, E4K_REG_DCTIME1, 0x01); e4k_reg_write(e4k, E4K_REG_DCTIME2, 0x01); #endif /* Set LNA mode to manual */ e4k_reg_write(e4k, E4K_REG_AGC4, 0x10); /* High threshold */ e4k_reg_write(e4k, E4K_REG_AGC5, 0x04); /* Low threshold */ e4k_reg_write(e4k, E4K_REG_AGC6, 0x1a); /* LNA calib + loop rate */ e4k_reg_set_mask(e4k, E4K_REG_AGC1, E4K_AGC1_MOD_MASK, E4K_AGC_MOD_SERIAL); /* Set Mixer Gain Control to manual */ e4k_reg_set_mask(e4k, E4K_REG_AGC7, E4K_AGC7_MIX_GAIN_AUTO, 0); #if 0 /* Enable LNA Gain enhancement */ e4k_reg_set_mask(e4k, E4K_REG_AGC11, 0x7, E4K_AGC11_LNA_GAIN_ENH | (2 << 1)); /* Enable automatic IF gain mode switching */ e4k_reg_set_mask(e4k, E4K_REG_AGC8, 0x1, E4K_AGC8_SENS_LIN_AUTO); #endif /* Use auto-gain as default */ e4k_enable_manual_gain(e4k, 0); /* Select moderate gain levels */ e4k_if_gain_set(e4k, 1, 6); e4k_if_gain_set(e4k, 2, 0); e4k_if_gain_set(e4k, 3, 0); e4k_if_gain_set(e4k, 4, 0); e4k_if_gain_set(e4k, 5, 9); e4k_if_gain_set(e4k, 6, 9); /* Set the most narrow filter we can possibly use */ e4k_if_filter_bw_set(e4k, E4K_IF_FILTER_MIX, KHZ(1900)); e4k_if_filter_bw_set(e4k, E4K_IF_FILTER_RC, KHZ(1000)); e4k_if_filter_bw_set(e4k, E4K_IF_FILTER_CHAN, KHZ(2150)); e4k_if_filter_chan_enable(e4k, 1); /* Disable time variant DC correction and LUT */ e4k_reg_set_mask(e4k, E4K_REG_DC5, 0x03, 0); e4k_reg_set_mask(e4k, E4K_REG_DCTIME1, 0x03, 0); e4k_reg_set_mask(e4k, E4K_REG_DCTIME2, 0x03, 0); return 0; }