rtl-sdr

Commit Graph

Author	SHA1	Message	Date
Steve Markgraf	a943a2ed25	tuner_fc001x: check if PLL values are within boundaries This fixes the issue of the FC0013 locking up at frequencies between 928.0 and 950.0 MHz, which happened because the numerator of the fraction exceeded its 5 bit limit. For the tuner to behave normally again, the dongle needed to be replugged. For the FC0013 this now results in a small gap between 948.6 MHz and 950.0 MHz, where no valid PLL values are existant. For the FC0012 tuning is aborted when the maximum frequency has been reached (948.6 MHz). Signed-off-by: Steve Markgraf <steve@steve-m.de>	12 years ago
Steve Markgraf	01d8d308fc	disable second ADC in IF mode, make input selectable in DS-mode Signed-off-by: Steve Markgraf <steve@steve-m.de>	12 years ago
Steve Markgraf	519406264c	make rtlsdr_close() build on win32 again Signed-off-by: Steve Markgraf <steve@steve-m.de>	12 years ago
Steve Markgraf	fc5881d4cd	add support for direct sampling mode This commit adds the function rtlsdr_set_direct_sampling() which can be used to enable/disable a mode where the RTL2832 acts as a direct sampling receiver. This mode disables the tuner, and by attaching a long wire, or better, a 50Ω to 200Ω transformer and a lowpass- filter to the In-phase ADC input (pin 1 or 2 of the RTL2832, whereas pin 1 is at the molded dot) it is possible to listen to shortwave radio stations. The coupling capacitors can be left in place, but for better results they should be removed. Tuning in this mode is done with the DDC, and since the ADC samples with 28.8 MHz, tuning is possible from 0 to 28.8 MHz. Signed-off-by: Steve Markgraf <steve@steve-m.de>	12 years ago
Kyle Keen	1533422f98	rtl_fm: half the oversample bugs Signed-off-by: Steve Markgraf <steve@steve-m.de>	12 years ago
Kyle Keen	a8e7c7b21e	rtl_fm: Axiomatic's automatic termination Signed-off-by: Steve Markgraf <steve@steve-m.de>	12 years ago
Kyle Keen	f4a8a570c4	rtl_fm: fix auto/manual gain Signed-off-by: Steve Markgraf <steve@steve-m.de>	12 years ago
Kyle Keen	c792c4aeac	rtl_fm: bugs found by Axiomatic, alkw0ia and cgommer Signed-off-by: Steve Markgraf <steve@steve-m.de>	12 years ago
Steve Markgraf	0c3c356d19	tuner_r820t: don't perform IMR calibration on init This takes simply too much time (almost 3 seconds) and doesn't really seem to make any difference for our use case. Signed-off-by: Steve Markgraf <steve@steve-m.de>	12 years ago
Steve Markgraf	5a26bd51e7	add initial support for the R820T tuner Signed-off-by: Steve Markgraf <steve@steve-m.de>	12 years ago
Steve Markgraf	5f88049c0c	rtlsdr_i2c_rad_reg: fix uninitialized variable This could lead to a misdetection of the tuner on some platforms (E4K instead of FC0013 on the raspberry pi). Thanks to Christoph Gommel for reporting this issue. Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Dimitri Stolnikov	22b9d82fb5	implement a more robust cancelation mechanism of async reader	13 years ago
Dimitri Stolnikov	b49a8336ee	disable e4k enhanced mixer gain as it seems to have no effect	13 years ago
Dimitri Stolnikov	88cd4b33cf	return RTLSDR_TUNER_UNKNOWN (0) on failure of rtlsdr_get_tuner_type	13 years ago
Steve Markgraf	54fe3eca01	don't print i2c read/write errors for now During autodetection of the tuner they are normal and may cause confusion. Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Steve Markgraf	3dff6f3c26	add pid of MyGica TD312 stick Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Hoernchen	2b8dfe43f8	fix win32 build Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Steve Markgraf	ec925a64ad	rtl_fm: disable win build for now, install rtl_fm Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Steve Markgraf	de978c3b3a	rtl_fm: fix typo that caused warning Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Steve Markgraf	f7f02836c4	rtl_fm: use getopt on win32 as well Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Kyle Keen	374abaebb8	rtl_fm: add experimental options Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Kyle Keen	d2f8faa204	rtl_fm: disabling fast_atan2() for now, too noisy Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Kyle Keen	62cc815863	rtl_fm: crude integer atan2, around 40% faster Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Kyle Keen	6e80117205	rtl_fm: missed a var init Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Kyle Keen	d56267a42f	rtl_fm: tweaks for nicer scanning Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Kyle Keen	c3dde1db91	rtl_fm: multithreaded and frequency scanning Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Kyle Keen	defa7af74b	rtl_fm: broken multi freq scanning Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Kyle Keen	6a9f5c14c2	rtl_fm: add -E for optional lower edge tuning Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Kyle Keen	37f5559d1c	rtl_fm: satisfactory squelch Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Steve Markgraf	fc390b3224	build rtl_fm Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Kyle Keen	6328e11da6	rtl_fm: prototype FM demod Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Steve Markgraf	9d0232385b	add debug messages to rtlsdr_read/write_array Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Dimitri Stolnikov	42a6592e63	disable sample rate correction until we find a proper solution	13 years ago
Steve Markgraf	2ad7b39e2d	rtlsdr_set_tuner_if_gain(): enable i2c repeater Thanks to Stefan Sydow for noticing this bug. Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Dimitri Stolnikov	f9b5d7b0a6	apply frequency correction value on the xtal clock directly by using this approach both, the tuning frequency and the sample rate should be corrected at the same time.	13 years ago
Steve Markgraf	7dc15d9fd7	add PIDs for 2 variants of the Terratex NOXON dongle Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Steve Markgraf	f3cf83e3d7	disable DAGC by default, add control function This adds rtlsdr_set_agc_mode() to enable/disable it. Thanks to Leif Asbrink for finding this setting. Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Steve Markgraf	98d1b864b6	have *_write_reg() functions pass through the return value Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Dimitri Stolnikov	6ea029d92c	add api function to control the IF gain for E4000 tuners	13 years ago
Steve Markgraf	304c7c863d	rtl_test: tuner PLL benchmark only works with E4000 Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Steve Markgraf	fc736ae67f	init: disable 4 MHz clock output The pin where this clock is outputted is quite close to the ADC inputs, so better disable it. Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Dimitri Stolnikov	b09628b3e8	fix symbol visibility for automake builds	13 years ago
Steve Markgraf	e5afd9894d	tuner_fc0012: add manual gain support Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Steve Markgraf	6aec27c6d0	tuner_e4k: relicense driver under GPLv2+ All authors have agreed to relicense the driver under GPLv2+, for easing integration in other projects (such as V4L). Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Steve Markgraf	1686a0f905	add another PID for Noxon v1 stick Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Steve Markgraf	3838df8669	rtl_tcp: ignore SIGPIPE Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Steve Markgraf	9d58aec8cf	correctly clear DDC shift and if_freq registers This fixes the 2 kHz LO shift. Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago
Dimitri Stolnikov	7bd3933c41	introduce getters for tuner parameters (gain, type)	13 years ago
Dimitri Stolnikov	d5bfa3867f	print the frequency for which the PLL couldn't lock	13 years ago
Steve Markgraf	352e50df43	add PID for Zaapa ZT-MINDVBZP Signed-off-by: Steve Markgraf <steve@steve-m.de>	13 years ago

1 2 3 4 5

216 Commits (84f0a9084bb944c0cd36289a462978054e93ca35)