MightyPork
/
rtl-sdr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

tuner_fc0012: use new cleaned-up driver

Browse Source 
The driver was taken from http://git.linuxtv.org/ and adapted
for librtlsdr. Manual gain will be added in a follow-up commit.

Signed-off-by: Steve Markgraf <steve@steve-m.de>
master
Steve Markgraf 13 years ago
parent 92d936568c
commit 4031d6ed04
3 changed files with 272 additions and 276 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 45
      include/tuner_fc0012.h
  2. 14
      src/librtlsdr.c
  3. 473
      src/tuner_fc0012.c

45
include/tuner_fc0012.h
Unescape View File

@ -1,25 +1,36 @@
#ifndef __TUNER_FC0012_H /*
#define __TUNER_FC0012_H * Fitipower FC0012 tuner driver
*
* Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
*
* modified for use in librtlsdr
* Copyright (C) 2012 Steve Markgraf <steve@steve-m.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#define FC0012_OK 0 #ifndef _FC0012_H_
#define FC0012_ERROR 1 #define _FC0012_H_
#define FC0012_I2C_ADDR 0xc6 #define FC0012_I2C_ADDR 0xc6
#define FC0012_CHECK_ADDR 0x00 #define FC0012_CHECK_ADDR 0x00
#define FC0012_CHECK_VAL 0xa1 #define FC0012_CHECK_VAL 0xa1
#define FC0012_BANDWIDTH_6MHZ 6 int fc0012_init(void *dev);
#define FC0012_BANDWIDTH_7MHZ 7 int fc0012_set_params(void *dev, uint32_t freq, uint32_t bandwidth);
#define FC0012_BANDWIDTH_8MHZ 8 int fc0012_set_gain(void *dev, int gain);
#define FC0012_LNA_GAIN_LOW 0x00
#define FC0012_LNA_GAIN_MID 0x08
#define FC0012_LNA_GAIN_HI 0x17
#define FC0012_LNA_GAIN_MAX 0x10
int FC0012_Open(void *pTuner);
int FC0012_Read(void *pTuner, unsigned char RegAddr, unsigned char *pByte);
int FC0012_Write(void *pTuner, unsigned char RegAddr, unsigned char Byte);
int FC0012_SetFrequency(void *pTuner, unsigned long Frequency, unsigned short Bandwidth);
#endif #endif

14
src/librtlsdr.c
Unescape View File

@ -122,17 +122,17 @@ int e4000_set_gain_mode(void *dev, int manual) {
return 0; return 0;
} }
int fc0012_init(void *dev) { return FC0012_Open(dev); } int _fc0012_init(void *dev) { return fc0012_init(dev); }
int fc0012_exit(void *dev) { return 0; } int fc0012_exit(void *dev) { return 0; }
int fc0012_set_freq(void *dev, uint32_t freq) { int fc0012_set_freq(void *dev, uint32_t freq) {
/* select V-band/U-band filter */ /* select V-band/U-band filter */
rtlsdr_set_gpio_bit(dev, 6, (freq > 300000000) ? 1 : 0); rtlsdr_set_gpio_bit(dev, 6, (freq > 300000000) ? 1 : 0);
return FC0012_SetFrequency(dev, freq/1000, 6); return fc0012_set_params(dev, freq, 6000000);
} }
int fc0012_set_bw(void *dev, int bw) { int fc0012_set_bw(void *dev, int bw) { return 0; }
return FC0012_SetFrequency(dev, ((rtlsdr_dev_t *) dev)->freq/1000, 6); int _fc0012_set_gain(void *dev, int gain) {
return fc0012_set_gain(dev, gain);
} }
int fc0012_set_gain(void *dev, int gain) { return 0; }
int fc0012_set_gain_mode(void *dev, int manual) { return 0; } int fc0012_set_gain_mode(void *dev, int manual) { return 0; }
int _fc0013_init(void *dev) { return fc0013_init(dev); } int _fc0013_init(void *dev) { return fc0013_init(dev); }
@ -173,8 +173,8 @@ static rtlsdr_tuner_t tuners[] = {
e4000_set_gain_mode e4000_set_gain_mode
}, },
{ {
fc0012_init, fc0012_exit, _fc0012_init, fc0012_exit,
fc0012_set_freq, fc0012_set_bw, fc0012_set_gain, fc0012_set_freq, fc0012_set_bw, _fc0012_set_gain,
fc0012_set_gain_mode fc0012_set_gain_mode
}, },
{ {

473
src/tuner_fc0012.c
Unescape View File

@ -1,21 +1,57 @@
/* /*
* fc0012 tuner support for rtl-sdr * Fitipower FC0012 tuner driver
* *
* Based on tuner_fc0012.c found as part of the (seemingly GPLed) * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
* rtl2832u Linux DVB driver.
* *
* Rewritten and hacked into rtl-sdr by David Basden <davidb-sdr@rcpt.to> * modified for use in librtlsdr
* Copyright (C) 2012 Steve Markgraf <steve@steve-m.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include <stdio.h>
#include <stdint.h> #include <stdint.h>
#include "rtlsdr_i2c.h" #include "rtlsdr_i2c.h"
#include "tuner_fc0012.h" #include "tuner_fc0012.h"
#define CRYSTAL_FREQ 28800000 static int fc0012_writereg(void *dev, uint8_t reg, uint8_t val)
{
uint8_t data[2];
data[0] = reg;
data[1] = val;
if (rtlsdr_i2c_write_fn(dev, FC0012_I2C_ADDR, data, 2) < 0)
return -1;
return 0;
}
static int fc0012_readreg(void *dev, uint8_t reg, uint8_t *val)
{
uint8_t data = reg;
if (rtlsdr_i2c_write_fn(dev, FC0012_I2C_ADDR, &data, 1) < 0)
return -1;
if (rtlsdr_i2c_read_fn(dev, FC0012_I2C_ADDR, &data, 1) < 0)
return -1;
#define FC0012_LNAGAIN FC0012_LNA_GAIN_HI *val = data;
return 0;
}
/* Incomplete list of register settings: /* Incomplete list of register settings:
* *
@ -51,205 +87,132 @@
* (big value -> low freq) * (big value -> low freq)
*/ */
/* glue functions to rtl-sdr code */ int fc0012_init(void *dev)
int FC0012_Write(void *pTuner, unsigned char RegAddr, unsigned char Byte)
{ {
uint8_t data[2]; int ret = 0;
unsigned int i;
data[0] = RegAddr; uint8_t reg[] = {
data[1] = Byte; 0x00, /* dummy reg. 0 */
0x05, /* reg. 0x01 */
0x10, /* reg. 0x02 */
0x00, /* reg. 0x03 */
0x00, /* reg. 0x04 */
0x0f, /* reg. 0x05: may also be 0x0a */
0x00, /* reg. 0x06: divider 2, VCO slow */
0x00, /* reg. 0x07: may also be 0x0f */
0xff, /* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256,
Loop Bw 1/8 */
0x6e, /* reg. 0x09: Disable LoopThrough, Enable LoopThrough: 0x6f */
0xb8, /* reg. 0x0a: Disable LO Test Buffer */
0x82, /* reg. 0x0b: Output Clock is same as clock frequency,
may also be 0x83 */
0xfc, /* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8 */
0x02, /* reg. 0x0d: AGC Not Forcing & LNA Forcing, 0x02 for DVB-T */
0x00, /* reg. 0x0e */
0x00, /* reg. 0x0f */
0x00, /* reg. 0x10: may also be 0x0d */
0x00, /* reg. 0x11 */
0x1f, /* reg. 0x12: Set to maximum gain */
0x08, /* reg. 0x13: Set to Middle Gain: 0x08,
Low Gain: 0x00, High Gain: 0x10, enable IX2: 0x80 */
0x00, /* reg. 0x14 */
0x04, /* reg. 0x15: Enable LNA COMPS */
};
if (rtlsdr_i2c_write_fn(pTuner, FC0012_I2C_ADDR, data, 2) < 0)
return FC0012_ERROR;
return FC0012_OK;
}
int FC0012_Read(void *pTuner, unsigned char RegAddr, unsigned char *pByte)
{
uint8_t data = RegAddr;
if (rtlsdr_i2c_write_fn(pTuner, FC0012_I2C_ADDR, &data, 1) < 0)
return FC0012_ERROR;
if (rtlsdr_i2c_read_fn(pTuner, FC0012_I2C_ADDR, &data, 1) < 0)
return FC0012_ERROR;
*pByte = data;
return FC0012_OK;
}
#ifdef DEBUG
#define DEBUGF printf
#else
#define DEBUGF(...) ()
#endif
#if 0 #if 0
void FC0012_Dump_Registers() switch (rtlsdr_get_tuner_clock(dev)) {
{ case FC_XTAL_27_MHZ:
#ifdef DEBUG case FC_XTAL_28_8_MHZ:
unsigned char regBuf; reg[0x07] |= 0x20;
int ret; break;
int i; case FC_XTAL_36_MHZ:
default:
DEBUGF("\nFC0012 registers:\n"); break;
for (i=0; i<=0x15; ++i)
{
ret = FC0012_Read(pTuner, i, &regBuf);
if (ret) DEBUGF("\nCouldn't read register %02x\n", i);
DEBUGF("R%x=%02x ",i,regBuf);
} }
DEBUGF("\n");
FC0012_Read(pTuner, 0x06, &regBuf);
DEBUGF("LNA_POWER_DOWN:\t%s\n", regBuf & 1 ? "Powered down" : "Not Powered Down");
DEBUGF("VCO_SPEED:\t%s\n", regBuf & 0x8 ? "High speed" : "Slow speed");
DEBUGF("Bandwidth:\t%s\n", (regBuf & 0xC) ? "8MHz" : "less than 8MHz");
FC0012_Read(pTuner, 0x07, &regBuf);
DEBUGF("Crystal Speed:\t%s\n", (regBuf & 0x20) ? "28.8MHz" : "36MHZ<!>");
FC0012_Read(pTuner, 0x09, &regBuf);
DEBUGF("RSSI calibration mode:\t%s\n", (regBuf & 0x10) ? "RSSI CALIBRATION IN PROGRESS<!>" : "Disabled");
FC0012_Read(pTuner, 0x0d, &regBuf);
DEBUGF("LNA Force:\t%s\n", (regBuf & 0x1) ? "Forced" : "Not Forced");
FC0012_Read(pTuner, 0x13, &regBuf);
DEBUGF("LNA Gain:\t");
switch (regBuf & 0x18) {
case (0x00): DEBUGF("Low\n"); break;
case (0x08): DEBUGF("Middle\n"); break;
case (0x10): DEBUGF("High\n"); break;
default: DEBUGF("unknown gain value 0x18\n");
}
#endif
}
#endif #endif
reg[0x07] |= 0x20;
int FC0012_Open(void *pTuner) // if (priv->dual_master)
{ reg[0x0c] |= 0x02;
// DEBUGF("FC0012_Open start");
if (FC0012_Write(pTuner, 0x01, 0x05)) return -1;
if (FC0012_Write(pTuner, 0x02, 0x10)) return -1;
if (FC0012_Write(pTuner, 0x03, 0x00)) return -1;
if (FC0012_Write(pTuner, 0x04, 0x00)) return -1;
if (FC0012_Write(pTuner, 0x05, 0x0F)) return -1;
if (FC0012_Write(pTuner, 0x06, 0x00)) return -1; // divider 2, VCO slow
if (FC0012_Write(pTuner, 0x07, 0x20)) return -1; // change to 0x00 for a 36MHz crystal
if (FC0012_Write(pTuner, 0x08, 0xFF)) return -1; // AGC Clock divide by 254, AGC gain 1/256, Loop Bw 1/8
if (FC0012_Write(pTuner, 0x09, 0x6E)) return -1; // Disable LoopThrough
if (FC0012_Write(pTuner, 0x0A, 0xB8)) return -1; // Disable LO Test Buffer
if (FC0012_Write(pTuner, 0x0B, 0x82)) return -1; // Output Clock is same as clock frequency
//if (FC0012_Write(pTuner, 0x0C, 0xF8)) return -1;
if (FC0012_Write(pTuner, 0x0C, 0xFC)) return -1; // AGC up-down mode
if (FC0012_Write(pTuner, 0x0D, 0x02)) return -1; // AGC Not Forcing & LNA Forcing
if (FC0012_Write(pTuner, 0x0E, 0x00)) return -1;
if (FC0012_Write(pTuner, 0x0F, 0x00)) return -1;
if (FC0012_Write(pTuner, 0x10, 0x00)) return -1;
if (FC0012_Write(pTuner, 0x11, 0x00)) return -1;
if (FC0012_Write(pTuner, 0x12, 0x1F)) return -1; // Set to maximum gain
if (FC0012_Write(pTuner, 0x13, FC0012_LNAGAIN)) return -1;
if (FC0012_Write(pTuner, 0x14, 0x00)) return -1;
if (FC0012_Write(pTuner, 0x15, 0x04)) return -1; // Enable LNA COMPS
/* Black magic from nim_rtl2832_fc0012.c in DVB driver.
Even though we've set 0x11 to 0x00 above, this needs to happen to have
it go back
*/
if (FC0012_Write(pTuner, 0x0d, 0x02)) return -1;
if (FC0012_Write(pTuner, 0x11, 0x00)) return -1;
if (FC0012_Write(pTuner, 0x15, 0x04)) return -1;
// DEBUGF("FC0012_Open SUCCESS");
return FC0012_OK;
}
# if 0 for (i = 1; i < sizeof(reg); i++) {
// Frequency is in kHz. Bandwidth is in MHz ret = fc0012_writereg(dev, i, reg[i]);
// This is pseudocode to set GPIO6 for VHF/UHF filter switching. if (ret)
// Trying to do this in reality leads to fail currently. I'm probably doing it wrong. break;
void FC0012_Frequency_Control(unsigned int Frequency, unsigned short Bandwidth)
{
if( Frequency < 260000 && Frequency > 150000 )
{
// set GPIO6 = low
// 1. Set tuner frequency
// 2. if the program quality is not good enough, switch to frequency + 500kHz
// 3. if the program quality is still no good, switch to frequency - 500kHz
} }
else
{
// set GPIO6 = high
// set tuner frequency return ret;
}
} }
#endif
int FC0012_SetFrequency(void *pTuner, unsigned long Frequency, unsigned short Bandwidth) int fc0012_set_params(void *dev, uint32_t freq, uint32_t bandwidth)
{ {
int VCO_band = 0; int i, ret = 0;
unsigned long doubleVCO; uint8_t reg[7], am, pm, multi, tmp;
unsigned short xin, xdiv; uint64_t f_vco;
unsigned char reg[21], am, pm, multi; uint32_t xtal_freq_div_2;
unsigned char read_byte; uint16_t xin, xdiv;
int vco_select = 0;
unsigned long CrystalFreqKhz;
xtal_freq_div_2 = rtlsdr_get_tuner_clock(dev) / 2;
// DEBUGF("FC0012_SetFrequency start");
/* select frequency divider and the frequency of VCO */
if (freq < 37084000) { /* freq * 96 < 3560000000 */
multi = 96;
reg[5] = 0x82;
reg[6] = 0x00;
} else if (freq < 55625000) { /* freq * 64 < 3560000000 */
multi = 64;
reg[5] = 0x82;
reg[6] = 0x02;
} else if (freq < 74167000) { /* freq * 48 < 3560000000 */
multi = 48;
reg[5] = 0x42;
reg[6] = 0x00;
} else if (freq < 111250000) { /* freq * 32 < 3560000000 */
multi = 32;
reg[5] = 0x42;
reg[6] = 0x02;
} else if (freq < 148334000) { /* freq * 24 < 3560000000 */
multi = 24;
reg[5] = 0x22;
reg[6] = 0x00;
} else if (freq < 222500000) { /* freq * 16 < 3560000000 */
multi = 16;
reg[5] = 0x22;
reg[6] = 0x02;
} else if (freq < 296667000) { /* freq * 12 < 3560000000 */
multi = 12;
reg[5] = 0x12;
reg[6] = 0x00;
} else if (freq < 445000000) { /* freq * 8 < 3560000000 */
multi = 8;
reg[5] = 0x12;
reg[6] = 0x02;
} else if (freq < 593334000) { /* freq * 6 < 3560000000 */
multi = 6;
reg[5] = 0x0a;
reg[6] = 0x00;
} else {
multi = 4;
reg[5] = 0x0a;
reg[6] = 0x02;
}
CrystalFreqKhz = (rtlsdr_get_tuner_clock(pTuner) + 500) / 1000; f_vco = freq * multi;
//===================================== Select frequency divider and the frequency of VCO if (f_vco >= 3060000000U) {
if (Frequency * 96 < 3560000) reg[6] |= 0x08;
{ vco_select = 1;
multi = 96; reg[5] = 0x82; reg[6] = 0x00;
}
else if (Frequency * 64 < 3560000)
{
multi = 64; reg[5] = 0x82; reg[6] = 0x02;
}
else if (Frequency * 48 < 3560000)
{
multi = 48; reg[5] = 0x42; reg[6] = 0x00;
}
else if (Frequency * 32 < 3560000)
{
multi = 32; reg[5] = 0x42; reg[6] = 0x02;
}
else if (Frequency * 24 < 3560000)
{
multi = 24; reg[5] = 0x22; reg[6] = 0x00;
} }
else if (Frequency * 16 < 3560000)
{
multi = 16; reg[5] = 0x22; reg[6] = 0x02;
}
else if (Frequency * 12 < 3560000)
{
multi = 12; reg[5] = 0x12; reg[6] = 0x00;
}
else if (Frequency * 8 < 3560000)
{
multi = 8; reg[5] = 0x12; reg[6] = 0x02;
}
else if (Frequency * 6 < 3560000)
{
multi = 6; reg[5] = 0x0A; reg[6] = 0x00;
}
else
{
multi = 4; reg[5] = 0x0A; reg[6] = 0x02;
}
doubleVCO = Frequency * multi;
reg[6] = reg[6] | 0x08; if (freq >= 45000000) {
VCO_band = 1; /* From divided value (XDIV) determined the FA and FP value */
xdiv = (unsigned short)(doubleVCO / (CrystalFreqKhz / 2)); xdiv = (uint16_t)(f_vco / xtal_freq_div_2);
if( (doubleVCO - xdiv * (CrystalFreqKhz / 2)) >= (CrystalFreqKhz / 4) ) if ((f_vco - xdiv * xtal_freq_div_2) >= (xtal_freq_div_2 / 2))
xdiv = xdiv + 1; xdiv++;
pm = (unsigned char)( xdiv / 8 ); pm = (uint8_t)(xdiv / 8);
am = (unsigned char)( xdiv - (8 * pm)); am = (uint8_t)(xdiv - (8 * pm));
if (am < 2) { if (am < 2) {
reg[1] = am + 8; reg[1] = am + 8;
@ -258,70 +221,92 @@ int FC0012_SetFrequency(void *pTuner, unsigned long Frequency, unsigned short Ba
reg[1] = am; reg[1] = am;
reg[2] = pm; reg[2] = pm;
} }
} else {
/* fix for frequency less than 45 MHz */
reg[1] = 0x06;
reg[2] = 0x11;
}
// From VCO frequency determines the XIN ( fractional part of Delta Sigma PLL) and divided value (XDIV). /* fix clock out */
xin = (unsigned short)(doubleVCO - ((unsigned short)(doubleVCO / (CrystalFreqKhz / 2))) * (CrystalFreqKhz / 2)); reg[6] |= 0x20;
xin = ((xin << 15)/(unsigned short)(CrystalFreqKhz / 2));
if( xin >= (unsigned short) 16384 ) /* From VCO frequency determines the XIN ( fractional part of Delta
xin = xin + (unsigned short) 32768; Sigma PLL) and divided value (XDIV) */
xin = (uint16_t)((f_vco - (f_vco / xtal_freq_div_2) * xtal_freq_div_2) / 1000);
reg[3] = (unsigned char)(xin >> 8); xin = (xin << 15) / (xtal_freq_div_2 / 1000);
reg[4] = (unsigned char)(xin & 0x00FF); if (xin >= 16384)
xin += 32768;
reg[3] = xin >> 8; /* xin with 9 bit resolution */
reg[4] = xin & 0xff;
reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
switch (bandwidth) {
case 6000000:
reg[6] |= 0x80;
break;
case 7000000:
reg[6] |= 0x40;
break;
case 8000000:
default:
break;
}
// DEBUGF("Frequency: %lu, Fa: %d, Fp: %d, Xin:%d \n", Frequency, am, pm, xin); /* modified for Realtek demod */
reg[5] |= 0x07;
switch(Bandwidth) for (i = 1; i <= 6; i++) {
{ ret = fc0012_writereg(dev, i, reg[i]);
case 6: reg[6] = 0x80 | reg[6]; break; if (ret)
case 7: reg[6] = (~0x80 & reg[6]) | 0x40; break; goto exit;
case 8: default: reg[6] = ~0xC0 & reg[6]; break;
} }
if (FC0012_Write(pTuner, 0x01, reg[1])) return -1; /* VCO Calibration */
if (FC0012_Write(pTuner, 0x02, reg[2])) return -1; ret = fc0012_writereg(dev, 0x0e, 0x80);
if (FC0012_Write(pTuner, 0x03, reg[3])) return -1; if (!ret)
if (FC0012_Write(pTuner, 0x04, reg[4])) return -1; ret = fc0012_writereg(dev, 0x0e, 0x00);
//reg[5] = reg[5] | 0x07; // This is really not cool. Why is it there?
if (FC0012_Write(pTuner, 0x05, reg[5])) return -1; /* VCO Re-Calibration if needed */
if (FC0012_Write(pTuner, 0x06, reg[6])) return -1; if (!ret)
ret = fc0012_writereg(dev, 0x0e, 0x00);
// VCO Calibration
if (FC0012_Write(pTuner, 0x0E, 0x80)) return -1; if (!ret) {
if (FC0012_Write(pTuner, 0x0E, 0x00)) return -1; // msleep(10);
ret = fc0012_readreg(dev, 0x0e, &tmp);
// Read resulting VCO control voltage
if (FC0012_Write(pTuner, 0x0E, 0x00)) return -1;
if (FC0012_Read(pTuner, 0x0E, &read_byte)) return -1;
reg[14] = 0x3F & read_byte;
// Adjust VCO range if control voltage is at the limit
if (VCO_band)
{
// high-band VCO hitting low frequency bound
if (reg[14] > 0x3C)
{
// select low-band VCO
reg[6] = ~0x08 & reg[6];
if (FC0012_Write(pTuner, 0x06, reg[6])) return -1;
if (FC0012_Write(pTuner, 0x0E, 0x80)) return -1;
if (FC0012_Write(pTuner, 0x0E, 0x00)) return -1;
} }
if (ret)
goto exit;
/* vco selection */
tmp &= 0x3f;
if (vco_select) {
if (tmp > 0x3c) {
reg[6] &= ~0x08;
ret = fc0012_writereg(dev, 0x06, reg[6]);
if (!ret)
ret = fc0012_writereg(dev, 0x0e, 0x80);
if (!ret)
ret = fc0012_writereg(dev, 0x0e, 0x00);
} }
else } else {
{ if (tmp < 0x02) {
// low-band VCO hitting high frequency bound reg[6] |= 0x08;
if (reg[14] < 0x02) { ret = fc0012_writereg(dev, 0x06, reg[6]);
// select high-band VCO if (!ret)
reg[6] = 0x08 | reg[6]; ret = fc0012_writereg(dev, 0x0e, 0x80);
if (!ret)
if (FC0012_Write(pTuner, 0x06, reg[6])) return -1; ret = fc0012_writereg(dev, 0x0e, 0x00);
if (FC0012_Write(pTuner, 0x0E, 0x80)) return -1;
if (FC0012_Write(pTuner, 0x0E, 0x00)) return -1;
} }
} }
// DEBUGF("FC0012_SetFrequency SUCCESS"); FC0012_Dump_Registers(); exit:
return FC0012_OK; return ret;
} }
int fc0012_set_gain(void *dev, int gain)
{
/* TODO add gain regulation */
return 0;
}

Write Preview
Loading…
Cancel
Save