You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
rtl-sdr/include/rtl-sdr.h

397 lines
13 KiB

/*
* rtl-sdr, turns your Realtek RTL2832 based DVB dongle into a SDR receiver
* Copyright (C) 2012-2013 by Steve Markgraf <steve@steve-m.de>
* Copyright (C) 2012 by Dimitri Stolnikov <horiz0n@gmx.net>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __RTL_SDR_H
#define __RTL_SDR_H
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <rtl-sdr_export.h>
typedef struct rtlsdr_dev rtlsdr_dev_t;
RTLSDR_API uint32_t rtlsdr_get_device_count(void);
RTLSDR_API const char* rtlsdr_get_device_name(uint32_t index);
/*!
* Get USB device strings.
*
* NOTE: The string arguments must provide space for up to 256 bytes.
*
* \param index the device index
* \param manufact manufacturer name, may be NULL
* \param product product name, may be NULL
* \param serial serial number, may be NULL
* \return 0 on success
*/
RTLSDR_API int rtlsdr_get_device_usb_strings(uint32_t index,
char *manufact,
char *product,
char *serial);
/*!
* Get device index by USB serial string descriptor.
*
* \param serial serial string of the device
* \return device index of first device where the name matched
* \return -1 if name is NULL
* \return -2 if no devices were found at all
* \return -3 if devices were found, but none with matching name
*/
RTLSDR_API int rtlsdr_get_index_by_serial(const char *serial);
RTLSDR_API int rtlsdr_open(rtlsdr_dev_t **dev, uint32_t index);
RTLSDR_API int rtlsdr_close(rtlsdr_dev_t *dev);
/* configuration functions */
/*!
* Set crystal oscillator frequencies used for the RTL2832 and the tuner IC.
*
* Usually both ICs use the same clock. Changing the clock may make sense if
* you are applying an external clock to the tuner or to compensate the
* frequency (and samplerate) error caused by the original (cheap) crystal.
*
* NOTE: Call this function only if you fully understand the implications.
*
* \param dev the device handle given by rtlsdr_open()
* \param rtl_freq frequency value used to clock the RTL2832 in Hz
* \param tuner_freq frequency value used to clock the tuner IC in Hz
* \return 0 on success
*/
RTLSDR_API int rtlsdr_set_xtal_freq(rtlsdr_dev_t *dev, uint32_t rtl_freq,
uint32_t tuner_freq);
/*!
* Get crystal oscillator frequencies used for the RTL2832 and the tuner IC.
*
* Usually both ICs use the same clock.
*
* \param dev the device handle given by rtlsdr_open()
* \param rtl_freq frequency value used to clock the RTL2832 in Hz
* \param tuner_freq frequency value used to clock the tuner IC in Hz
* \return 0 on success
*/
RTLSDR_API int rtlsdr_get_xtal_freq(rtlsdr_dev_t *dev, uint32_t *rtl_freq,
uint32_t *tuner_freq);
/*!
* Get USB device strings.
*
* NOTE: The string arguments must provide space for up to 256 bytes.
*
* \param dev the device handle given by rtlsdr_open()
* \param manufact manufacturer name, may be NULL
* \param product product name, may be NULL
* \param serial serial number, may be NULL
* \return 0 on success
*/
RTLSDR_API int rtlsdr_get_usb_strings(rtlsdr_dev_t *dev, char *manufact,
char *product, char *serial);
/*!
* Write the device EEPROM
*
* \param dev the device handle given by rtlsdr_open()
* \param data buffer of data to be written
* \param offset address where the data should be written
* \param len length of the data
* \return 0 on success
* \return -1 if device handle is invalid
* \return -2 if EEPROM size is exceeded
* \return -3 if no EEPROM was found
*/
RTLSDR_API int rtlsdr_write_eeprom(rtlsdr_dev_t *dev, uint8_t *data,
uint8_t offset, uint16_t len);
/*!
* Read the device EEPROM
*
* \param dev the device handle given by rtlsdr_open()
* \param data buffer where the data should be written
* \param offset address where the data should be read from
* \param len length of the data
* \return 0 on success
* \return -1 if device handle is invalid
* \return -2 if EEPROM size is exceeded
* \return -3 if no EEPROM was found
*/
RTLSDR_API int rtlsdr_read_eeprom(rtlsdr_dev_t *dev, uint8_t *data,
uint8_t offset, uint16_t len);
RTLSDR_API int rtlsdr_set_center_freq(rtlsdr_dev_t *dev, uint32_t freq);
/*!
* Get actual frequency the device is tuned to.
*
* \param dev the device handle given by rtlsdr_open()
* \return 0 on error, frequency in Hz otherwise
*/
RTLSDR_API uint32_t rtlsdr_get_center_freq(rtlsdr_dev_t *dev);
/*!
* Set the frequency correction value for the device.
*
* \param dev the device handle given by rtlsdr_open()
* \param ppm correction value in parts per million (ppm)
* \return 0 on success
*/
RTLSDR_API int rtlsdr_set_freq_correction(rtlsdr_dev_t *dev, int ppm);
/*!
* Get actual frequency correction value of the device.
*
* \param dev the device handle given by rtlsdr_open()
* \return correction value in parts per million (ppm)
*/
RTLSDR_API int rtlsdr_get_freq_correction(rtlsdr_dev_t *dev);
enum rtlsdr_tuner {
RTLSDR_TUNER_UNKNOWN = 0,
RTLSDR_TUNER_E4000,
RTLSDR_TUNER_FC0012,
RTLSDR_TUNER_FC0013,
RTLSDR_TUNER_FC2580,
RTLSDR_TUNER_R820T,
RTLSDR_TUNER_R828D
};
/*!
* Get the tuner type.
*
* \param dev the device handle given by rtlsdr_open()
* \return RTLSDR_TUNER_UNKNOWN on error, tuner type otherwise
*/
RTLSDR_API enum rtlsdr_tuner rtlsdr_get_tuner_type(rtlsdr_dev_t *dev);
/*!
* Get a list of gains supported by the tuner.
*
* NOTE: The gains argument must be preallocated by the caller. If NULL is
* being given instead, the number of available gain values will be returned.
*
* \param dev the device handle given by rtlsdr_open()
* \param gains array of gain values. In tenths of a dB, 115 means 11.5 dB.
* \return <= 0 on error, number of available (returned) gain values otherwise
*/
RTLSDR_API int rtlsdr_get_tuner_gains(rtlsdr_dev_t *dev, int *gains);
13 years ago
/*!
* Set the gain for the device.
* Manual gain mode must be enabled for this to work.
*
* Valid gain values (in tenths of a dB) for the E4000 tuner:
* -10, 15, 40, 65, 90, 115, 140, 165, 190,
* 215, 240, 290, 340, 420, 430, 450, 470, 490
*
* Valid gain values may be queried with \ref rtlsdr_get_tuner_gains function.
*
13 years ago
* \param dev the device handle given by rtlsdr_open()
* \param gain in tenths of a dB, 115 means 11.5 dB.
* \return 0 on success
*/
RTLSDR_API int rtlsdr_set_tuner_gain(rtlsdr_dev_t *dev, int gain);
/*!
* Set the bandwidth for the device.
*
* \param dev the device handle given by rtlsdr_open()
* \param bw bandwidth in Hz. Zero means automatic BW selection.
* \return 0 on success
*/
RTLSDR_API int rtlsdr_set_tuner_bandwidth(rtlsdr_dev_t *dev, uint32_t bw);
13 years ago
/*!
* Get actual gain the device is configured to.
*
* \param dev the device handle given by rtlsdr_open()
* \return 0 on error, gain in tenths of a dB, 115 means 11.5 dB.
13 years ago
*/
RTLSDR_API int rtlsdr_get_tuner_gain(rtlsdr_dev_t *dev);
/*!
* Set the intermediate frequency gain for the device.
*
* \param dev the device handle given by rtlsdr_open()
* \param stage intermediate frequency gain stage number (1 to 6 for E4000)
* \param gain in tenths of a dB, -30 means -3.0 dB.
* \return 0 on success
*/
RTLSDR_API int rtlsdr_set_tuner_if_gain(rtlsdr_dev_t *dev, int stage, int gain);
13 years ago
/*!
* Set the gain mode (automatic/manual) for the device.
* Manual gain mode must be enabled for the gain setter function to work.
*
* \param dev the device handle given by rtlsdr_open()
* \param manual gain mode, 1 means manual gain mode shall be enabled.
* \return 0 on success
*/
RTLSDR_API int rtlsdr_set_tuner_gain_mode(rtlsdr_dev_t *dev, int manual);
/*!
* Set the sample rate for the device, also selects the baseband filters
* according to the requested sample rate for tuners where this is possible.
*
* \param dev the device handle given by rtlsdr_open()
* \param samp_rate the sample rate to be set, possible values are:
* 225001 - 300000 Hz
* 900001 - 3200000 Hz
* sample loss is to be expected for rates > 2400000
* \return 0 on success, -EINVAL on invalid rate
*/
RTLSDR_API int rtlsdr_set_sample_rate(rtlsdr_dev_t *dev, uint32_t rate);
/*!
* Get actual sample rate the device is configured to.
*
* \param dev the device handle given by rtlsdr_open()
* \return 0 on error, sample rate in Hz otherwise
*/
RTLSDR_API uint32_t rtlsdr_get_sample_rate(rtlsdr_dev_t *dev);
/*!
* Enable test mode that returns an 8 bit counter instead of the samples.
* The counter is generated inside the RTL2832.
*
* \param dev the device handle given by rtlsdr_open()
* \param test mode, 1 means enabled, 0 disabled
* \return 0 on success
*/
RTLSDR_API int rtlsdr_set_testmode(rtlsdr_dev_t *dev, int on);
/*!
* Enable or disable the internal digital AGC of the RTL2832.
*
* \param dev the device handle given by rtlsdr_open()
* \param digital AGC mode, 1 means enabled, 0 disabled
* \return 0 on success
*/
RTLSDR_API int rtlsdr_set_agc_mode(rtlsdr_dev_t *dev, int on);
/*!
* Enable or disable the direct sampling mode. When enabled, the IF mode
* of the RTL2832 is activated, and rtlsdr_set_center_freq() will control
* the IF-frequency of the DDC, which can be used to tune from 0 to 28.8 MHz
* (xtal frequency of the RTL2832).
*
* \param dev the device handle given by rtlsdr_open()
* \param on 0 means disabled, 1 I-ADC input enabled, 2 Q-ADC input enabled
* \return 0 on success
*/
RTLSDR_API int rtlsdr_set_direct_sampling(rtlsdr_dev_t *dev, int on);
/*!
* Get state of the direct sampling mode
*
* \param dev the device handle given by rtlsdr_open()
* \return -1 on error, 0 means disabled, 1 I-ADC input enabled
* 2 Q-ADC input enabled
*/
RTLSDR_API int rtlsdr_get_direct_sampling(rtlsdr_dev_t *dev);
/*!
* Enable or disable offset tuning for zero-IF tuners, which allows to avoid
* problems caused by the DC offset of the ADCs and 1/f noise.
*
* \param dev the device handle given by rtlsdr_open()
* \param on 0 means disabled, 1 enabled
* \return 0 on success
*/
RTLSDR_API int rtlsdr_set_offset_tuning(rtlsdr_dev_t *dev, int on);
/*!
* Get state of the offset tuning mode
*
* \param dev the device handle given by rtlsdr_open()
* \return -1 on error, 0 means disabled, 1 enabled
*/
RTLSDR_API int rtlsdr_get_offset_tuning(rtlsdr_dev_t *dev);
/* streaming functions */
RTLSDR_API int rtlsdr_reset_buffer(rtlsdr_dev_t *dev);
RTLSDR_API int rtlsdr_read_sync(rtlsdr_dev_t *dev, void *buf, int len, int *n_read);
typedef void(*rtlsdr_read_async_cb_t)(unsigned char *buf, uint32_t len, void *ctx);
/*!
* Read samples from the device asynchronously. This function will block until
* it is being canceled using rtlsdr_cancel_async()
*
* NOTE: This function is deprecated and is subject for removal.
*
* \param dev the device handle given by rtlsdr_open()
* \param cb callback function to return received samples
* \param ctx user specific context to pass via the callback function
* \return 0 on success
*/
RTLSDR_API int rtlsdr_wait_async(rtlsdr_dev_t *dev, rtlsdr_read_async_cb_t cb, void *ctx);
/*!
* Read samples from the device asynchronously. This function will block until
* it is being canceled using rtlsdr_cancel_async()
*
* \param dev the device handle given by rtlsdr_open()
* \param cb callback function to return received samples
* \param ctx user specific context to pass via the callback function
* \param buf_num optional buffer count, buf_num * buf_len = overall buffer size
* set to 0 for default buffer count (15)
* \param buf_len optional buffer length, must be multiple of 512,
* should be a multiple of 16384 (URB size), set to 0
* for default buffer length (16 * 32 * 512)
* \return 0 on success
*/
RTLSDR_API int rtlsdr_read_async(rtlsdr_dev_t *dev,
rtlsdr_read_async_cb_t cb,
void *ctx,
uint32_t buf_num,
uint32_t buf_len);
/*!
* Cancel all pending asynchronous operations on the device.
*
* \param dev the device handle given by rtlsdr_open()
* \return 0 on success
*/
RTLSDR_API int rtlsdr_cancel_async(rtlsdr_dev_t *dev);
/*!
* Enable or disable the bias tee on GPIO PIN 0.
*
* \param dev the device handle given by rtlsdr_open()
* \param on 1 for Bias T on. 0 for Bias T off.
* \return -1 if device is not initialized. 0 otherwise.
*/
RTLSDR_API int rtlsdr_set_bias_tee(rtlsdr_dev_t *dev, int on);
#ifdef __cplusplus
}
#endif
#endif /* __RTL_SDR_H */